Re: [PATCH 06/15] arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evk
From: Marco Felsch
Date: Thu Oct 20 2022 - 07:12:52 EST
Hi Peng,
On 22-10-20, Peng Fan (OSS) wrote:
> From: Han Xu <han.xu@xxxxxxx>
>
> enable fspi nor on imx8mp evk dts
>
> Reviewed-by: Frank Li <frank.li@xxxxxxx>
> Signed-off-by: Han Xu <han.xu@xxxxxxx>
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 27 ++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 366f709f8790..f36033b9cebb 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -85,6 +85,22 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> };
> };
>
> +&flexspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexspi0>;
> + status = "okay";
> +
> + flash0: mt25qu256aba@0 {
^
This should throw a warning. You need to name it flash@0.
Nit: The phandle name is not very useful, instead I would name it
nor_flash or so.
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
compatible is the first property followed by the reg.
> + spi-max-frequency = <80000000>;
> + spi-tx-bus-width = <1>;
> + spi-rx-bus-width = <4>;
> + };
> +};
> +
> &A53_0 {
> cpu-supply = <®_arm>;
> };
> @@ -585,6 +601,17 @@ MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /* CAN2_STBY */
> >;
> };
>
> + pinctrl_flexspi0: flexspi0grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
> + MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
> + MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
> + MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
> + MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
> + MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
> + >;
> + };
> +
> pinctrl_gpio_led: gpioledgrp {
> fsl,pins = <
> MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140
> --
> 2.37.1
>
>
>