Re: [PATCH V4 1/2] RISC-V: Add arch_crash_save_vmcoreinfo support

From: Guo Ren
Date: Thu Oct 20 2022 - 10:35:43 EST


Tested-by: Guo Ren <guoren@xxxxxxxxxx>

Don't forget the another two kdump fixups [1]
[1] https://lore.kernel.org/all/20221020141603.2856206-3-guoren@xxxxxxxxxx/

Only the patch without [1]:
crash> help -r
CPU 0: [OFFLINE]

CPU 1:
epc : ffffffff80009ff0 ra : ffffffff800b789a sp : ff2000001098bb40
gp : ffffffff815fca60 tp : ff60000004680000 t0 : 6666666666663c5b
t1 : 0000000000000000 t2 : 666666666666663c s0 : ff2000001098bc90
s1 : ffffffff81600798 a0 : ff2000001098bb48 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000
a5 : ff60000004690800 a6 : 0000000000000000 a7 : 0000000000000000
s2 : ff2000001098bb48 s3 : ffffffff81093ec8 s4 : ffffffff816004ac
s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80e7f720
s8 : 00fffffffffff3f0 s9 : 0000000000000007 s10: 00aaaaaaaab98700
s11: 0000000000000001 t3 : ffffffff819a8097 t4 : ffffffff819a8097
t5 : ffffffff819a8098 t6 : ff2000001098b9a8

CPU 2: [OFFLINE]

CPU 3: [OFFLINE]

The patch with [1]:
crash> help -r
CPU 0:
epc : ffffffff80003f34 ra : ffffffff808caa7c sp : ffffffff81403eb0
gp : ffffffff815fcb48 tp : ffffffff81413400 t0 : 0000000000000000
t1 : 0000000000000000 t2 : 0000000000000000 s0 : ffffffff81403ec0
s1 : 0000000000000000 a0 : 0000000000000000 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
s2 : ffffffff816001c8 s3 : ffffffff81600370 s4 : ffffffff80c32e18
s5 : ffffffff819d3018 s6 : ffffffff810e2110 s7 : 0000000000000000
s8 : 0000000000000000 s9 : 0000000080039eac s10: 0000000000000000
s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000
t5 : 0000000000000000 t6 : 0000000000000000

CPU 1:
epc : ffffffff80003f34 ra : ffffffff808caa7c sp : ff2000000068bf30
gp : ffffffff815fcb48 tp : ff6000000240d400 t0 : 0000000000000000
t1 : 0000000000000000 t2 : 0000000000000000 s0 : ff2000000068bf40
s1 : 0000000000000001 a0 : 0000000000000000 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
s2 : ffffffff816001c8 s3 : ffffffff81600370 s4 : ffffffff80c32e18
s5 : ffffffff819d3018 s6 : ffffffff810e2110 s7 : 0000000000000000
s8 : 0000000000000000 s9 : 0000000080039ea8 s10: 0000000000000000
s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000
t5 : 0000000000000000 t6 : 0000000000000000

CPU 2:
epc : ffffffff80003f34 ra : ffffffff808caa7c sp : ff20000000693f30
gp : ffffffff815fcb48 tp : ff6000000240e900 t0 : 0000000000000000
t1 : 0000000000000000 t2 : 0000000000000000 s0 : ff20000000693f40
s1 : 0000000000000002 a0 : 0000000000000000 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
s2 : ffffffff816001c8 s3 : ffffffff81600370 s4 : ffffffff80c32e18
s5 : ffffffff819d3018 s6 : ffffffff810e2110 s7 : 0000000000000000
s8 : 0000000000000000 s9 : 0000000080039eb0 s10: 0000000000000000
s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000
t5 : 0000000000000000 t6 : 0000000000000000

CPU 3:
epc : ffffffff8000a1e4 ra : ffffffff800b7bba sp : ff200000109bbb40
gp : ffffffff815fcb48 tp : ff6000000373aa00 t0 : 6666666666663c5b
t1 : 0000000000000000 t2 : 666666666666663c s0 : ff200000109bbc90
s1 : ffffffff816007a0 a0 : ff200000109bbb48 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000001 a4 : 0000000000000000
a5 : ff60000002c61c00 a6 : 0000000000000000 a7 : 0000000000000000
s2 : ff200000109bbb48 s3 : ffffffff810941a8 s4 : ffffffff816004b4
s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80e7f7a0
s8 : 00fffffffffff3f0 s9 : 0000000000000007 s10: 00aaaaaaaab98700
s11: 0000000000000001 t3 : ffffffff819a8097 t4 : ffffffff819a8097
t5 : ffffffff819a8098 t6 : ff200000109bb9a8

On Wed, Oct 19, 2022 at 6:36 PM Xianting Tian
<xianting.tian@xxxxxxxxxxxxxxxxx> wrote:
>
> Add arch_crash_save_vmcoreinfo(), which exports VM layout(MODULES, VMALLOC,
> VMEMMAP ranges and KERNEL_LINK_ADDR), va bits and ram base for vmcore.
>
> Default pagetable levels and PAGE_OFFSET aren't same for different kernel
> version as below. For pagetable levels, it sets sv57 by default and falls
> back to setting sv48 at boot time if sv57 is not supported by the hardware.
>
> For ram base, the default value is 0x80200000 for qemu riscv64 env and,
> for example, is 0x200000 on the XuanTie 910 CPU.
>
> * Linux Kernel 5.18 ~
> * PGTABLE_LEVELS = 5
> * PAGE_OFFSET = 0xff60000000000000
> * Linux Kernel 5.17 ~
> * PGTABLE_LEVELS = 4
> * PAGE_OFFSET = 0xffffaf8000000000
> * Linux Kernel 4.19 ~
> * PGTABLE_LEVELS = 3
> * PAGE_OFFSET = 0xffffffe000000000
>
> Since these configurations change from time to time and version to version,
> it is preferable to export them via vmcoreinfo than to change the crash's
> code frequently, it can simplify the development of crash tool.
>
> Signed-off-by: Xianting Tian <xianting.tian@xxxxxxxxxxxxxxxxx>
> ---
> arch/riscv/kernel/Makefile | 1 +
> arch/riscv/kernel/crash_core.c | 23 +++++++++++++++++++++++
> 2 files changed, 24 insertions(+)
> create mode 100644 arch/riscv/kernel/crash_core.c
>
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index db6e4b1294ba..4cf303a779ab 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -81,6 +81,7 @@ obj-$(CONFIG_KGDB) += kgdb.o
> obj-$(CONFIG_KEXEC_CORE) += kexec_relocate.o crash_save_regs.o machine_kexec.o
> obj-$(CONFIG_KEXEC_FILE) += elf_kexec.o machine_kexec_file.o
> obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
> +obj-$(CONFIG_CRASH_CORE) += crash_core.o
>
> obj-$(CONFIG_JUMP_LABEL) += jump_label.o
>
> diff --git a/arch/riscv/kernel/crash_core.c b/arch/riscv/kernel/crash_core.c
> new file mode 100644
> index 000000000000..3e889d0ed7bd
> --- /dev/null
> +++ b/arch/riscv/kernel/crash_core.c
> @@ -0,0 +1,23 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/crash_core.h>
> +#include <linux/pagemap.h>
> +
> +void arch_crash_save_vmcoreinfo(void)
> +{
> + VMCOREINFO_NUMBER(VA_BITS);
> + VMCOREINFO_NUMBER(phys_ram_base);
> +
> + vmcoreinfo_append_str("NUMBER(PAGE_OFFSET)=0x%lx\n", PAGE_OFFSET);
> + vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
> + vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
> + vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
> + vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
> +#ifdef CONFIG_64BIT
> + vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
> + vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
> +#endif
> +
> + if (IS_ENABLED(CONFIG_64BIT))
> + vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR);
> +}
> --
> 2.17.1
>


--
Best Regards
Guo Ren