[PATCH 12/12] arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level

[Andrew Davis]

I2C nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information.

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the I2C nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@xxxxxx>
---
 .../dts/ti/k3-j721s2-common-proc-board.dts    | 24 -------------------
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |  6 +++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  3 +++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  1 +
 4 files changed, 10 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 3f4106f76893b..a7aa6cf08acd4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -261,30 +261,6 @@ exp2: gpio@22 {
 	};
 };
 
-&main_i2c1 {
-	status = "disabled";
-};
-
-&main_i2c2 {
-	status = "disabled";
-};
-
-&main_i2c3 {
-	status = "disabled";
-};
-
-&main_i2c4 {
-	status = "disabled";
-};
-
-&main_i2c5 {
-	status = "disabled";
-};
-
-&main_i2c6 {
-	status = "disabled";
-};
-
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 1c18d6df6361a..d1ec261103761 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -266,6 +266,7 @@ main_i2c1: i2c@2010000 {
 		clocks = <&k3_clks 215 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c2: i2c@2020000 {
@@ -277,6 +278,7 @@ main_i2c2: i2c@2020000 {
 		clocks = <&k3_clks 216 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 216 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c3: i2c@2030000 {
@@ -288,6 +290,7 @@ main_i2c3: i2c@2030000 {
 		clocks = <&k3_clks 217 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c4: i2c@2040000 {
@@ -299,6 +302,7 @@ main_i2c4: i2c@2040000 {
 		clocks = <&k3_clks 218 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c5: i2c@2050000 {
@@ -310,6 +314,7 @@ main_i2c5: i2c@2050000 {
 		clocks = <&k3_clks 219 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_i2c6: i2c@2060000 {
@@ -321,6 +326,7 @@ main_i2c6: i2c@2060000 {
 		clocks = <&k3_clks 220 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	main_sdhci0: mmc@4f80000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index d1dd40a6e42a4..3264b8e8faea5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -146,6 +146,7 @@ wkup_i2c0: i2c@42120000 {
 		clocks = <&k3_clks 223 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c0: i2c@40b00000 {
@@ -157,6 +158,7 @@ mcu_i2c0: i2c@40b00000 {
 		clocks = <&k3_clks 221 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_i2c1: i2c@40b10000 {
@@ -168,6 +170,7 @@ mcu_i2c1: i2c@40b10000 {
 		clocks = <&k3_clks 222 1>;
 		clock-names = "fck";
 		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 	};
 
 	mcu_mcan0: can@40528000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index a2cb0916e4a2f..6930efff8a5a3 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -56,6 +56,7 @@ J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */
 };
 
 &main_i2c0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
-- 
2.37.3