[PATCH 11/12] arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level
From: Andrew Davis
Date: Thu Oct 20 2022 - 12:04:34 EST
MCAN nodes defined in the top-level J721s2 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux
information.
As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.
Disable the MCAN nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.
Signed-off-by: Andrew Davis <afd@xxxxxx>
---
.../dts/ti/k3-j721s2-common-proc-board.dts | 70 +------------------
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 18 +++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 +
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 1 +
4 files changed, 23 insertions(+), 68 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 9f1a0ca4dc372..3f4106f76893b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -321,81 +321,15 @@ &cpsw_port1 {
};
&mcu_mcan0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan0_pins_default>;
phys = <&transceiver1>;
};
&mcu_mcan1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_mcan1_pins_default>;
phys = <&transceiver2>;
};
-
-&main_mcan0 {
- status = "disabled";
-};
-
-&main_mcan1 {
- status = "disabled";
-};
-
-&main_mcan2 {
- status = "disabled";
-};
-
-&main_mcan3 {
- status = "disabled";
-};
-
-&main_mcan4 {
- status = "disabled";
-};
-
-&main_mcan5 {
- status = "disabled";
-};
-
-&main_mcan6 {
- status = "disabled";
-};
-
-&main_mcan7 {
- status = "disabled";
-};
-
-&main_mcan8 {
- status = "disabled";
-};
-
-&main_mcan9 {
- status = "disabled";
-};
-
-&main_mcan10 {
- status = "disabled";
-};
-
-&main_mcan11 {
- status = "disabled";
-};
-
-&main_mcan12 {
- status = "disabled";
-};
-
-&main_mcan13 {
- status = "disabled";
-};
-
-&main_mcan14 {
- status = "disabled";
-};
-
-&main_mcan15 {
- status = "disabled";
-};
-
-&main_mcan17 {
- status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index ddc54921d34f6..1c18d6df6361a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -732,6 +732,7 @@ main_mcan0: can@2701000 {
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan1: can@2711000 {
@@ -746,6 +747,7 @@ main_mcan1: can@2711000 {
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan2: can@2721000 {
@@ -760,6 +762,7 @@ main_mcan2: can@2721000 {
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan3: can@2731000 {
@@ -774,6 +777,7 @@ main_mcan3: can@2731000 {
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan4: can@2741000 {
@@ -788,6 +792,7 @@ main_mcan4: can@2741000 {
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan5: can@2751000 {
@@ -802,6 +807,7 @@ main_mcan5: can@2751000 {
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan6: can@2761000 {
@@ -816,6 +822,7 @@ main_mcan6: can@2761000 {
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan7: can@2771000 {
@@ -830,6 +837,7 @@ main_mcan7: can@2771000 {
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan8: can@2781000 {
@@ -844,6 +852,7 @@ main_mcan8: can@2781000 {
<GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan9: can@2791000 {
@@ -858,6 +867,7 @@ main_mcan9: can@2791000 {
<GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan10: can@27a1000 {
@@ -872,6 +882,7 @@ main_mcan10: can@27a1000 {
<GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan11: can@27b1000 {
@@ -886,6 +897,7 @@ main_mcan11: can@27b1000 {
<GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan12: can@27c1000 {
@@ -900,6 +912,7 @@ main_mcan12: can@27c1000 {
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan13: can@27d1000 {
@@ -914,6 +927,7 @@ main_mcan13: can@27d1000 {
<GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan14: can@2681000 {
@@ -928,6 +942,7 @@ main_mcan14: can@2681000 {
<GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan15: can@2691000 {
@@ -942,6 +957,7 @@ main_mcan15: can@2691000 {
<GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan16: can@26a1000 {
@@ -956,6 +972,7 @@ main_mcan16: can@26a1000 {
<GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
main_mcan17: can@26b1000 {
@@ -970,5 +987,6 @@ main_mcan17: can@26b1000 {
<GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 3de4218e8e125..d1dd40a6e42a4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -182,6 +182,7 @@ mcu_mcan0: can@40528000 {
<GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
mcu_mcan1: can@40568000 {
@@ -196,6 +197,7 @@ mcu_mcan1: can@40568000 {
<GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
};
mcu_navss: bus@28380000{
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index d25f38d896c01..a2cb0916e4a2f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -73,6 +73,7 @@ exp_som: gpio@21 {
};
&main_mcan16 {
+ status = "okay";
pinctrl-0 = <&main_mcan16_pins_default>;
pinctrl-names = "default";
phys = <&transceiver0>;
--
2.37.3