Re: [PATCH v2] Add hardcoded crystal clock for KabyLake

[Peter Zijlstra]

On Tue, Oct 18, 2022 at 07:01:32PM +0000, Rishabh Agrawal wrote:
> Set KabyLake crystal clock manually since the TSC calibration is off
> by 0.5%. All the tests that are based on the timer/clock will fail in
> this case.
> 
> The HPET has been disabled by upstream due to PC10 issue causing the
> 3 hatch devices, dratini, jinlon, and kohaku to not calibrate the clock

I have no idea what a hatch device is, nor what pokemon have anything to
do with things.

> precisely. These 3 devices are KabyLake devices. Intel team has verified

But no actual Intel person with a Reviewed-by tag we can go pester if
this turns out to be wrong.

> that all KBL devices have 24.0 MHz clock frequency, therefore this
> change is valid.

And yet you only change KBL_L.

And why, pray *WHY* can't Intel simply write the correct information in
CPUID leaf 15h. I mean, they defined the leaf, might as well use it, no?

> Signed-off-by: Rishabh Agrawal <rishabhagr@xxxxxxxxxxxx>
> ---
> 
> Changes in v2:
>   - Adding Thomas Gleixner, Daniel Drake, Rafael Wysocki, Len brown and Ingo to review since you worked on this.
> 
>  arch/x86/kernel/tsc.c | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> index cafacb2e58cc..63a06224fa48 100644
> --- a/arch/x86/kernel/tsc.c
> +++ b/arch/x86/kernel/tsc.c
> @@ -644,10 +644,21 @@ unsigned long native_calibrate_tsc(void)
>  	 * Denverton SoCs don't report crystal clock, and also don't support
>  	 * CPUID.0x16 for the calculation below, so hardcode the 25MHz crystal
>  	 * clock.
> +	 *
> +	 * Intel KabyLake devices' clocks are off by 0.5% when using the below
> +	 * calculation, so hardcode 24.0 MHz crystal clock.
>  	 */
> -	if (crystal_khz == 0 &&
> -			boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT_D)
> -		crystal_khz = 25000;
> +	if (crystal_khz == 0) {
> +		switch (boot_cpu_data.x86_model) {
> +		case INTEL_FAM6_ATOM_GOLDMONT_D:
> +			crystal_khz = 25000;
> +			break;
> +		case INTEL_FAM6_KABYLAKE_L:
> +			crystal_khz = 24000;
> +			break;
> +		}
> +
> +	}
>  
>  	/*
>  	 * TSC frequency reported directly by CPUID is a "hardware reported"
> -- 
> 2.38.0.413.g74048e4d9e-goog
>