Re: [PATCH] Add rumble support to latest xbox controllers

[Siarhei Vishniakou]

Hi Bastien,

I prefer to keep the various names in the commit message, just so that
it's easier to find the commit later when searching for the patch.
I found that various teams refer to various controllers in a different way.
Happy to rename the variables in the code, though.

How about something like:
USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708
USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1708_FIRMWARE_2021
USB_DEVICE_ID_MS_XBOX_CONTROLLER_MODEL_1914
?

I tested this on an Android device, with a simple rumble test app that I wrote.
A better way would probably be to write some EV_FF events to
/dev/input/eventX node.
You could try the "python-evdev" module, which provides a sample rumble script:
https://python-evdev.readthedocs.io/en/latest/tutorial.html#injecting-an-ff-event-into-first-ff-capable-device-found
I haven't tried that since there's no python on Android.

Here's the list of controllers where this could also work:

Controller VID PID Classic/BLE
Xbox One S 0x045E 0x02E0 Classic
Xbox One S 0x045E 0x02FD Classic
Xbox One S 0x045E 0x0B20 BLE
Xbox Elite Series 2 0x045E 0x0B05 Classic
Xbox Elite Series 2 0x045E 0x0B22 BLE
Xbox Series S|X 0x045E 0x0B13 BLE


On Thu, Oct 20, 2022 at 10:33 AM Bastien Nocera <hadess@xxxxxxxxxx> wrote:
>
> On Thu, 2022-10-20 at 09:14 -0700, Siarhei Vishniakou wrote:
> > Currently, rumble is only supported via bluetooth on a single xbox
> > controller, called 'model 1708'. On the back of the device, it's
> > named
> > 'wireless controller for xbox one'. However, in 2021, Microsoft
> > released
> > a firmware update for this controller. As part of this update, the
> > HID
> > descriptor of the device changed. The product ID was also changed
> > from
> > 0x02fd to 0x0b20. On this controller, rumble was supported via
> > hid-microsoft, which matched against the old product id (0x02fd). As
> > a
> > result, the firmware update broke rumble support on this controller.
> >
> > The hid-microsoft driver actually supports rumble on the new
> > firmware,
> > as well. So simply adding new product id is sufficient to bring back
> > this support.
> >
> > After discussing further with the xbox team, it was pointed out that
> > other xbox controllers, such as xbox elite, should also be possible
> > to
> > support in a similar way. However, I could only verify this on 2
> > controllers so far.
> >
> > In this patch, add rumble support for the following 2 controllers:
> > 1. 'wireless controller for xbox one', model 1708, after applying the
> >    most recent firmware update as of 2022-10-20.
> > 2. 'xbox wireless controller', model 1914. This is also sometimes
> >    referred to as 'xbox series S|X'.
>
> This is a good summary of the different models:
> https://en.wikipedia.org/wiki/Xbox_Wireless_Controller#Summary
>
> You can remove the mention of the other names it might have, or the
> names at the back of the joypad, and use the model numbers instead.
>
> I think I have a model of each one of the devices in the list (except
> 1797 and 1537 IIRC), so I could test this if needed. Do you have a good
> test case for the various forces of rumble that would exercise both
> motors?