Re: [PATCH 00/12] TI J7x Disable Incomplete DT Nodes

[Bryan Brattlof]

On October 20, 2022 thus sayeth Andrew Davis:
> Hello all,
> 
> Same story as for AM64x[0] and AM62x[1], this time for J7x.
> 
> This one was a little more involved that the last 2 rounds as some IP
> (like UART) are pinned out using the default pinmux. Perhaps we should be
> explicit here and have pinmux nodes that simply restate the defaults. I
> can go solve that in a follow up series if we think that is what we
> want to do.
> 
> I have the last round for AM65x ready to post, but that involves a few
> boards that I do not have (Simatic IOT2050) but would like to do some
> additional re-work with, so holding off until after I get that sorted.
> 
> Thanks,
> Andrew
> 
> [0] https://www.spinics.net/lists/arm-kernel/msg1018532.html
> [1] https://www.spinics.net/lists/arm-kernel/msg1018864.html
> 
> Andrew Davis (12):
>   arm64: dts: ti: k3-j721e: Enable UART nodes at the board level
>   arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level
>   arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level
>   arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level
>   arm64: dts: ti: k3-j7200: Enable UART nodes at the board level
>   arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level
>   arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level
>   arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level
>   arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level
>   arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level
>   arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level
>   arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level
> 
>  .../dts/ti/k3-j7200-common-proc-board.dts     |  48 ++----
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     |  29 ++++
>  .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |   5 +
>  arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   |  42 +----
>  .../dts/ti/k3-j721e-common-proc-board.dts     | 141 +++-------------
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  55 ++++++
>  .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |   7 +
>  arch/arm64/boot/dts/ti/k3-j721e-sk.dts        | 158 ++----------------
>  arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   |  33 +---
>  .../dts/ti/k3-j721s2-common-proc-board.dts    | 132 +--------------
>  arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    |  58 +++++++
>  .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |   7 +
>  arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  98 +----------
>  13 files changed, 231 insertions(+), 582 deletions(-)
> 

*whew* these Jacinto boards have a lot of stuff on them :) but it LGTM

Reviewed-by: Bryan Brattlof <bb@xxxxxx>

~Bryan