Re: [PATCH 05/15] arm64: dts: imx8mp-evk: enable uart1/3 ports

[Peng Fan]

Hi Marco,

On 10/21/2022 5:09 PM, Marco Felsch wrote:
> On 22-10-21, Peng Fan wrote:
> > Hi Marco,
> >
> > On 10/20/2022 7:07 PM, Marco Felsch wrote:
> > > Hi Peng,
> > >
> > > On 22-10-20, Peng Fan (OSS) wrote:
> > > > From: Peng Fan <peng.fan@xxxxxxx>
> > > >
> > > > Enable uart1/3 ports for evk board.
> > > >
> > > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > > > ---
> > > >    arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 36 ++++++++++++++++++++
> > > >    1 file changed, 36 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > > index 2e29bb3c041c..366f709f8790 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > > > @@ -428,6 +428,15 @@ &snvs_pwrkey {
> > > >    	status = "okay";
> > > >    };
> > > > +&uart1 { /* BT */
> > > > +	pinctrl-names = "default";
> > > > +	pinctrl-0 = <&pinctrl_uart1>;
> > > > +	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
> > > > +	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
> > >
> > > I'm curious, what is the default parent and why is this wrong? For the
> > > already exisiting uart2 we don't do that. Same applies for uart3.
> >
> > The default parent is OSC_24M. The uart2 is for console, so 24M is ok.
> > As I recall, we met issue 24M not able to get higher baudrate.
>
> What did you mean by higher baudrate, is it everything > 115200? When
> the console baudrates can be fullfilled with the PLL1_80M as well
> wouldn't it be worth to fix the imx8mp.dtsi instead?

To console, we use 115200, 24M could fullfill it.

BaudRate = (clk / ref_clk_div) / (16 * (ubmr + 1) / (ubir + 1))

If you have 24M ref_clk, the max baudrate is 1.5M, with setting
ubmr, ubir to 0, and ref clk divider to 1.

So more higher baudrate, 24M could not fulfill.

THanks,
Peng.

> Regards,
>    Marco