[PATCH v3 06/15] phy: qcom-qmp-pcie: rename PHY ops structure
From: Johan Hovold
Date: Fri Oct 21 2022 - 07:11:03 EST
Rename the PHY operation structure so that it has a "phy_ops" suffix and
move it next to the implementation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index e30cbc94cbf6..bd946438e3c3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2037,6 +2037,13 @@ static int qmp_pcie_set_mode(struct phy *phy, enum phy_mode mode, int submode)
return 0;
}
+static const struct phy_ops qmp_pcie_phy_ops = {
+ .power_on = qmp_pcie_enable,
+ .power_off = qmp_pcie_disable,
+ .set_mode = qmp_pcie_set_mode,
+ .owner = THIS_MODULE,
+};
+
static int qmp_pcie_vreg_init(struct qmp_pcie *qmp)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2160,13 +2167,6 @@ static int phy_pipe_clk_register(struct qmp_pcie *qmp, struct device_node *np)
return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np);
}
-static const struct phy_ops qmp_pcie_ops = {
- .power_on = qmp_pcie_enable,
- .power_off = qmp_pcie_disable,
- .set_mode = qmp_pcie_set_mode,
- .owner = THIS_MODULE,
-};
-
static int qmp_pcie_create(struct qmp_pcie *qmp, struct device_node *np)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -2229,7 +2229,7 @@ static int qmp_pcie_create(struct qmp_pcie *qmp, struct device_node *np)
"failed to get pipe clock\n");
}
- generic_phy = devm_phy_create(dev, np, &qmp_pcie_ops);
+ generic_phy = devm_phy_create(dev, np, &qmp_pcie_phy_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
dev_err(dev, "failed to create PHY: %d\n", ret);
--
2.37.3