RE: [PATCH 1/2] cxl/pci: Add generic MSI-X/MSI irq support

[Dan Williams]

Davidlohr Bueso wrote:
> Introduce a generic irq table for CXL components/features that can have
> standard irq support - DOE requires dynamic vector sizing and is not
> considered here. For now the table is empty.
> 
> Create an infrastructure to query the max vectors required for the CXL
> device. Upon successful allocation, users can plug in their respective isr
> at any point thereafter, which is supported by a new cxlds->has_irq flag,
> for example, if the irq setup is not done in the PCI driver, such as
> the case of the CXL-PMU.
> 
> Reviewed-by: Dave Jiang <dave.jiang@xxxxxxxxx>
> Signed-off-by: Davidlohr Bueso <dave@xxxxxxxxxxxx>
> ---
>  drivers/cxl/cxlmem.h |  3 ++
>  drivers/cxl/pci.c    | 72 ++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 75 insertions(+)
> 
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 88e3a8e54b6a..72b69b003302 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -211,6 +211,7 @@ struct cxl_endpoint_dvsec_info {
>   * @info: Cached DVSEC information about the device.
>   * @serial: PCIe Device Serial Number
>   * @doe_mbs: PCI DOE mailbox array
> + * @has_irq: PCIe MSI-X/MSI support
>   * @mbox_send: @dev specific transport for transmitting mailbox commands
>   *
>   * See section 8.2.9.5.2 Capacity Configuration and Label Storage for
> @@ -247,6 +248,8 @@ struct cxl_dev_state {
>  
>  	struct xarray doe_mbs;
>  
> +	bool has_irq;
> +
>  	int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
>  };
>  
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index faeb5d9d7a7a..9c3e95ebaa26 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -428,6 +428,73 @@ static void devm_cxl_pci_create_doe(struct cxl_dev_state *cxlds)
>  	}
>  }
>  
> +/**
> + * struct cxl_irq_cap - CXL feature that is capable of receiving MSI-X/MSI irqs.
> + *
> + * @name: Name of the device/component generating this interrupt.
> + * @get_max_msgnum: Get the feature's largest interrupt message number.  If the
> + *		    feature does not have the Interrupt Supported bit set, then
> + *		    return -1.
> + */
> +struct cxl_irq_cap {
> +	const char *name;
> +	int (*get_max_msgnum)(struct cxl_dev_state *cxlds);

Why is this a callback, why not just have the features populate their
irq numbers?

> +};
> +
> +static const struct cxl_irq_cap cxl_irq_cap_table[] = {
> +	NULL
> +};
> +
> +static void cxl_pci_free_irq_vectors(void *data)
> +{
> +	pci_free_irq_vectors(data);
> +}
> +
> +/*
> + * Attempt to allocate the largest amount of necessary vectors.
> + *
> + * Returns 0 upon a successful allocation of *all* vectors, or a
> + * negative value otherwise.
> + */
> +static int cxl_pci_alloc_irq_vectors(struct cxl_dev_state *cxlds)
> +{
> +	struct device *dev = cxlds->dev;
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +	int rc, i, vectors = -1;
> +
> +	for (i = 0; i < ARRAY_SIZE(cxl_irq_cap_table); i++) {
> +		int irq;
> +
> +		if (!cxl_irq_cap_table[i].get_max_msgnum)
> +			continue;
> +
> +		irq = cxl_irq_cap_table[i].get_max_msgnum(cxlds);
> +		vectors = max_t(int, irq, vectors);
> +	}

Forgive me if I have missed something, I only look at interrupt enable
code once every few years, and the APIs are always a bit different, but
is this not too early to read the message number? The number is not
stable until either MSI or MSI-X has been selected below at
pci_alloc_irq_vectors() time?

> +
> +	/*
> +	 * Semantically lack of irq support is not an error, but we
> +	 * still fail to allocate, so return negative.
> +	 */
> +	if (vectors == -1)
> +		return -1;
> +
> +	vectors++;
> +	rc = pci_alloc_irq_vectors(pdev, vectors, vectors,
> +				   PCI_IRQ_MSIX | PCI_IRQ_MSI);
> +	if (rc < 0)
> +		return rc;
> +
> +	if (rc != vectors) {
> +		dev_dbg(dev, "Not enough interrupts; use polling instead.\n");
> +		/* some got allocated, clean them up */
> +		cxl_pci_free_irq_vectors(pdev);
> +		return -ENOSPC;
> +	}
> +
> +	return devm_add_action_or_reset(dev, cxl_pci_free_irq_vectors, pdev);
> +}
> +
>  static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  {
>  	struct cxl_register_map map;
> @@ -494,6 +561,11 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	if (rc)
>  		return rc;
>  
> +	if (!cxl_pci_alloc_irq_vectors(cxlds)) {
> +		cxlds->has_irq = true;
> +	} else
> +		cxlds->has_irq = false;
> +
>  	cxlmd = devm_cxl_add_memdev(cxlds);
>  	if (IS_ERR(cxlmd))
>  		return PTR_ERR(cxlmd);
> -- 
> 2.38.0
>