Re: [PATCH 3/4] arm64: dts: qcom: Add initial device tree for SM6375

[Krzysztof Kozlowski]

On 22/10/2022 15:42, Konrad Dybcio wrote:
> Add an initial device tree for the SM6375 (SD695) SoC.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm6375.dtsi | 808 +++++++++++++++++++++++++++
>  1 file changed, 808 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm6375.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> new file mode 100644
> index 000000000000..30cdc7d50f72
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
> @@ -0,0 +1,808 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/clock/qcom,sm6375-gcc.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <19200000>;
> +			clock-output-names = "xo_board";

This a DTSI for the SoC and these clocks do not exist on the SoC. So as
usual - either they are part of board, or at least you move there the
frequency to indicate that, or put them in DTSI and include from the board.

See entire thread:
https://lore.kernel.org/linux-arm-msm/9fbe1bf5-a84d-c56b-1c0e-6848ee3d30fe@xxxxxxxxxx/


Everything else LGTM.

Best regards,
Krzysztof