Re: [PATCH v5 2/3] Input: add driver for Himax hx83112b touchscreen devices

From: Jeff LaBundy
Date: Sun Oct 23 2022 - 16:07:57 EST

Next message: Jarkko Sakkinen: "Re: [PATCH 2/5] x86/sgx: use VM_ACCESS_FLAGS"
Previous message: Jarkko Sakkinen: "Re: [PATCH] x86/sgx: Reduce delay and interference of enclave release"
In reply to: Job Noorman: "[PATCH v5 2/3] Input: add driver for Himax hx83112b touchscreen devices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Job,

Looks great; just a few tiny nits that I missed last time. Sorry
about that!

On Sun, Oct 23, 2022 at 06:30:30PM +0200, Job Noorman wrote:
> This patch adds support for Himax hx83112b touchscreen devices. As there
> are no publicly available data sheets for these devices, the
> implementation is based on the driver of the downstream Android kernel
> used in the Fairphone 3. This patch is a complete rewrite, though, and
> the code bears no resemblence to the original implementation.
>
> The driver has been tested on the aforementioned phone.
>
> Signed-off-by: Job Noorman <job@xxxxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/input/touchscreen/Kconfig | 12 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/himax_hx83112b.c | 364 +++++++++++++++++++++
> 4 files changed, 378 insertions(+)
> create mode 100644 drivers/input/touchscreen/himax_hx83112b.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2418bffe9187..51a03f9586f1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9099,6 +9099,7 @@ M: Job Noorman <job@xxxxxxxxxxxx>
> L: linux-input@xxxxxxxxxxxxxxx
> S: Maintained
> F: Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
> +F: drivers/input/touchscreen/himax_hx83112b.c
>
> HIPPI
> M: Jes Sorensen <jes@xxxxxxxxxxxxxxxxxx>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index dc90a3ea51ee..8cdb16a811e6 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -1379,4 +1379,16 @@ config TOUCHSCREEN_ZINITIX
> To compile this driver as a module, choose M here: the
> module will be called zinitix.
>
> +config TOUCHSCREEN_HIMAX_HX83112B
> + tristate "Himax hx83112b touchscreen driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Say Y here to enable support for Himax hx83112b touchscreens.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called himax_hx83112b.
> +
> endif
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index 557f84fd2075..0f8bf79e01fe 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -116,3 +116,4 @@ obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
> obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
> obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
> obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o
> +obj-$(CONFIG_TOUCHSCREEN_HIMAX_HX83112B) += himax_hx83112b.o
> diff --git a/drivers/input/touchscreen/himax_hx83112b.c b/drivers/input/touchscreen/himax_hx83112b.c
> new file mode 100644
> index 000000000000..b671c8148e39
> --- /dev/null
> +++ b/drivers/input/touchscreen/himax_hx83112b.c
> @@ -0,0 +1,364 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Driver for Himax hx83112b touchscreens
> + *
> + * Copyright (C) 2022 Job Noorman <job@xxxxxxxxxxxx>
> + *
> + * This code is based on "Himax Android Driver Sample Code for QCT platform":
> + *
> + * Copyright (C) 2017 Himax Corporation.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/input/touchscreen.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/regmap.h>
> +
> +#define HIMAX_ID_83112B 0x83112b
> +
> +#define HIMAX_MAX_POINTS 10
> +
> +#define HIMAX_REG_CFG_SET_ADDR 0x00
> +#define HIMAX_REG_CFG_INIT_READ 0x0c
> +#define HIMAX_REG_CFG_READ_VALUE 0x08
> +#define HIMAX_REG_READ_EVENT 0x30
> +
> +#define HIMAX_CFG_PRODUCT_ID 0x900000d0
> +
> +#define HIMAX_INVALID_COORD 0xffff
> +
> +struct himax_event_point {
> + __be16 x;
> + __be16 y;
> +} __packed;
> +
> +struct himax_event {
> + struct himax_event_point points[HIMAX_MAX_POINTS];
> + u8 majors[HIMAX_MAX_POINTS];
> + u8 pad0[2];
> + u8 num_points;
> + u8 pad1[2];
> + u8 checksum_fix;
> +} __packed;
> +
> +static_assert(sizeof(struct himax_event) == 56);
> +
> +struct himax_ts_data {
> + struct gpio_desc *gpiod_rst;
> + struct input_dev *input_dev;
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct touchscreen_properties props;
> +};
> +
> +static const struct regmap_config himax_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 32,
> + .val_format_endian = REGMAP_ENDIAN_LITTLE,
> +};
> +
> +static int himax_read_config(struct himax_ts_data *ts, u32 address, u32 *dst)
> +{
> + int error;
> +
> + error = regmap_write(ts->regmap, HIMAX_REG_CFG_SET_ADDR, address);
> + if (error)
> + return error;
> +
> + error = regmap_write(ts->regmap, HIMAX_REG_CFG_INIT_READ, 0x0);
> + if (error)
> + return error;
> +
> + error = regmap_read(ts->regmap, HIMAX_REG_CFG_READ_VALUE, dst);
> + if (error)
> + return error;
> +
> + return 0;
> +}
> +
> +static void himax_reset(struct himax_ts_data *ts)
> +{
> + gpiod_set_value_cansleep(ts->gpiod_rst, 1);
> +
> + /* Delay copied from downstream driver */
> + msleep(20);
> + gpiod_set_value_cansleep(ts->gpiod_rst, 0);
> +
> + /*
> + * The downstream driver doesn't contain this delay but is seems safer
> + * to include it. The range is just a guess that seems to work well.
> + */
> + usleep_range(1000, 1100);
> +}
> +
> +static int himax_read_product_id(struct himax_ts_data *ts, u32 *product_id)
> +{
> + int error;
> +
> + error = himax_read_config(ts, HIMAX_CFG_PRODUCT_ID, product_id);
> + if (error)
> + return error;
> +
> + *product_id >>= 8;
> + return 0;
> +}
> +
> +static int himax_check_product_id(struct himax_ts_data *ts)
> +{
> + int error;
> + u32 product_id;
> +
> + error = himax_read_product_id(ts, &product_id);
> + if (error)
> + return error;
> +
> + dev_dbg(&ts->client->dev, "Product id: %x\n", product_id);
> +
> + switch (product_id) {
> + case HIMAX_ID_83112B:
> + return 0;
> +
> + default:
> + dev_err(&ts->client->dev,
> + "Unknown product id: %x\n", product_id);
> + return -EINVAL;
> + }
> +}
> +
> +static int himax_input_register(struct himax_ts_data *ts)
> +{
> + int error;
> +
> + ts->input_dev = devm_input_allocate_device(&ts->client->dev);
> + if (!ts->input_dev) {
> + dev_err(&ts->client->dev, "Failed to allocate input device\n");
> + return -ENOMEM;
> + }
> +
> + ts->input_dev->name = "Himax Touchscreen";
> +
> + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_X);
> + input_set_capability(ts->input_dev, EV_ABS, ABS_MT_POSITION_Y);
> + input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 200, 0, 0);
> + input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 200, 0, 0);
> +
> + touchscreen_parse_properties(ts->input_dev, true, &ts->props);
> +
> + error = input_mt_init_slots(ts->input_dev, HIMAX_MAX_POINTS,
> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
> + if (error) {
> + dev_err(&ts->client->dev,
> + "Failed to initialize MT slots: %d\n", error);
> + return error;
> + }
> +
> + error = input_register_device(ts->input_dev);
> + if (error) {
> + dev_err(&ts->client->dev,
> + "Failed to register input device: %d\n", error);
> + return error;
> + }
> +
> + return 0;
> +}
> +
> +static u8 himax_event_get_num_points(const struct himax_event *event)
> +{
> + if (event->num_points == 0xff)
> + return 0;
> + else
> + return event->num_points & 0x0f;
> +}
> +
> +static bool himax_process_event_point(struct himax_ts_data *ts,
> + const struct himax_event *event,
> + int point_index)
> +{
> + const struct himax_event_point *point = &event->points[point_index];
> + u16 x = be16_to_cpu(point->x);
> + u16 y = be16_to_cpu(point->y);
> + u8 w = event->majors[point_index];
> +
> + if (x == HIMAX_INVALID_COORD || y == HIMAX_INVALID_COORD)
> + return false;
> +
> + input_mt_slot(ts->input_dev, point_index);
> + input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
> + touchscreen_report_pos(ts->input_dev, &ts->props, x, y, true);
> + input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, w);
> + input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, w);
> + return true;
> +}
> +
> +static void himax_process_event(struct himax_ts_data *ts,
> + const struct himax_event *event)
> +{
> + int i;
> + int num_points_left = himax_event_get_num_points(event);
> +
> + for (i = 0; i < HIMAX_MAX_POINTS && num_points_left > 0; i++) {
> + if (himax_process_event_point(ts, event, i))
> + num_points_left--;
> + }
> +
> + input_mt_sync_frame(ts->input_dev);
> + input_sync(ts->input_dev);
> +}
> +
> +static bool himax_verify_checksum(struct himax_ts_data *ts,
> + const struct himax_event *event)
> +{
> + u8 *data = (u8 *)event;
> + int i;
> + u16 checksum = 0;
> +
> + for (i = 0; i < sizeof(*event); i++)
> + checksum += data[i];
> +
> + if ((checksum & 0x00ff) != 0) {
> + dev_err(&ts->client->dev, "Wrong event checksum: %04x\n",
> + checksum);
> + return false;
> + }
> +
> + return true;
> +}
> +
> +static int himax_handle_input(struct himax_ts_data *ts)
> +{
> + int error;
> + struct himax_event event;
> +
> + error = regmap_raw_read(ts->regmap, HIMAX_REG_READ_EVENT, &event,
> + sizeof(event));
> + if (error) {
> + dev_err(&ts->client->dev, "Failed to read input event: %d\n",
> + error);
> + return error;
> + }
> +
> + /*
> + * Only process the current event when it has a valid checksum but
> + * don't consider it a fatal error when it doesn't.
> + */
> + if (himax_verify_checksum(ts, &event))
> + himax_process_event(ts, &event);
> +
> + return 0;
> +}
> +
> +static irqreturn_t himax_irq_handler(int irq, void *dev_id)
> +{
> + int error;
> + struct himax_ts_data *ts = dev_id;
> +
> + error = himax_handle_input(ts);
> + if (error)
> + return IRQ_NONE;
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int himax_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int error;
> + struct device *dev = &client->dev;
> + struct himax_ts_data *ts;
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + dev_err(dev, "I2C check functionality failed\n");
> + return -ENXIO;
> + }
> +
> + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> + if (!ts)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, ts);
> + ts->client = client;
> +
> + ts->regmap = devm_regmap_init_i2c(client, &himax_regmap_config);
> + error = PTR_ERR_OR_ZERO(ts->regmap);
> + if (error) {
> + dev_err(&client->dev,

We already have a locally declared dev pointer which at this point is
equal to &client->dev as well as &ts->client->dev, so we can just use
that here instead.

> + "Failed to initialize regmap: %d\n", error);
> + return error;
> + }
> +
> + ts->gpiod_rst = devm_gpiod_get(&ts->client->dev, "reset",
> + GPIOD_OUT_HIGH);

Same thing here. Using the local variable will also let you avoid the
line break.

> + error = PTR_ERR_OR_ZERO(ts->gpiod_rst);
> + if (error) {
> + dev_err(&ts->client->dev,
> + "Failed to get reset GPIO: %d\n", error);

Also here...

> + return error;
> + }
> +
> + himax_reset(ts);
> +
> + error = himax_check_product_id(ts);
> + if (error)
> + return error;
> +
> + error = himax_input_register(ts);
> + if (error)
> + return error;
> +
> + return devm_request_threaded_irq(&client->dev, client->irq, NULL,
> + himax_irq_handler, IRQF_ONESHOT,
> + client->name, ts);

And finally here.

> +}
> +
> +static int himax_suspend(struct device *dev)
> +{
> + struct himax_ts_data *ts = dev_get_drvdata(dev);
> +
> + disable_irq(ts->client->irq);
> + return 0;
> +}
> +
> +static int himax_resume(struct device *dev)
> +{
> + struct himax_ts_data *ts = dev_get_drvdata(dev);
> +
> + enable_irq(ts->client->irq);
> + return 0;
> +}
> +
> +static DEFINE_SIMPLE_DEV_PM_OPS(himax_pm_ops, himax_suspend, himax_resume);
> +
> +static const struct i2c_device_id himax_ts_id[] = {
> + { "hx83112b", 0 },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, himax_ts_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id himax_of_match[] = {
> + { .compatible = "himax,hx83112b" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, himax_of_match);
> +#endif
> +
> +static struct i2c_driver himax_ts_driver = {
> + .probe = himax_probe,
> + .id_table = himax_ts_id,
> + .driver = {
> + .name = "Himax-hx83112b-TS",
> + .of_match_table = of_match_ptr(himax_of_match),
> + .pm = pm_sleep_ptr(&himax_pm_ops),
> + },
> +};
> +module_i2c_driver(himax_ts_driver);
> +
> +MODULE_AUTHOR("Job Noorman <job@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Himax hx83112b touchscreen driver");
> +MODULE_LICENSE("GPL");
> --
> 2.38.1
>

With those remaining points resolved:

Reviewed-by: Jeff LaBundy <jeff@xxxxxxxxxxx>

Kind regards,
Jeff LaBundy

Next message: Jarkko Sakkinen: "Re: [PATCH 2/5] x86/sgx: use VM_ACCESS_FLAGS"
Previous message: Jarkko Sakkinen: "Re: [PATCH] x86/sgx: Reduce delay and interference of enclave release"
In reply to: Job Noorman: "[PATCH v5 2/3] Input: add driver for Himax hx83112b touchscreen devices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]