Re: [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al.

[Shawn Guo]

On Wed, Sep 28, 2022 at 09:33:31AM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> 
> 
> This series is an assortment of USB dual-role specific commits as
> follows:
> 
> Introduce USBC_DET GPIO based USB dual-role aka device/host switching.
> 
> Move USB VBUS supply from single carrier board to module level device
> tree. This pin is as per Colibri module family standard.
> 
> Specify USBH_PEN GPIO being active-low rather than active-high
> (cosmetic only).
> 
> Remove spurious debounce property from linux,extcon-usb-gpio. That
> commit is actually for Colibri iMX7.
> 
> Changes in v2:
> - Dropped fixes tag as this change is rather cosmetic.
> - Add new commit also actually enabling CONFIG_EXTCON_USB_GPIO.
> 
> Marcel Ziswiler (4):
>   arm: dts: colibri-imx6: move vbus-supply to module level device tree
>   arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
>   arm: dts: imx7-colibri: remove spurious debounce property
>   ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support
> 
> Philippe Schenker (1):
>   arm: dts: colibri-imx6: usb dual-role switching

We idiomatically use prefix 'ARM: dts: ...' for i.MX arm DTS.  Fixed
them up and applied the series.

Shawn