Re: [PATCH v3] arm64: dts: imx8mq-kontron-pitx-imx8m: remove off-on-delay-us for regulator-usdhc2-vmmc

From: Heiko Thiery
Date: Mon Oct 24 2022 - 10:35:38 EST


Hi Marco,

Am Mo., 24. Okt. 2022 um 14:34 Uhr schrieb Marco Felsch
<m.felsch@xxxxxxxxxxxxxx>:
>
> Hi Heiko,
>
> On 22-10-24, Heiko Thiery wrote:
> > With that delay U-Boot is not able to store the environment variables in
> > the SD card. Since the delay is not required it can be remove.
>
> Now I'm curious, since this doesn't tell us the why, it just tell us
> about the end result. I'm asking because the NXP EVKs have an issue with
> the sd-card power line capacity and we need this delay to reach a level
> which is marked as low within the sd-spec.

I must admit that I do not know at all why this entry was made. I have
now looked at the dtbs of the imx8 EVKs and except for imx8dxl-evk.dts
I see no delay here.

--
Heiko

> Regards,
> Marco
>
>
> > Fixes: 5dbadc848259 (arm64: dts: fsl: add support for Kontron pitx-imx8m board)
> >
> > Signed-off-by: Heiko Thiery <heiko.thiery@xxxxxxxxx>
> > ---
> > v3:
> > - Improve commit message and explain why it is a fix (thanks to Fabio)
> >
> > v2:
> > - add Fixes tag
> >
> > arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > index a91c136797f6..21442e04a632 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
> > @@ -51,7 +51,6 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
> > regulator-min-microvolt = <3300000>;
> > regulator-max-microvolt = <3300000>;
> > gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> > - off-on-delay-us = <20000>;
> > enable-active-high;
> > };
> > };
> > --
> > 2.30.2
> >
> >