Aw: Re: [PATCH v3 3/7] dt-bindings: mmc: mtk-sd: add mt7986
From: Frank Wunderlich
Date: Mon Oct 24 2022 - 13:24:49 EST
Hi
> Gesendet: Sonntag, 23. Oktober 2022 um 14:56 Uhr
> Von: "Krzysztof Kozlowski" <krzysztof.kozlowski@xxxxxxxxxx>
> An: "Frank Wunderlich" <linux@xxxxxxxxx>, linux-mediatek@xxxxxxxxxxxxxxxxxxx
> Cc: "Frank Wunderlich" <frank-w@xxxxxxxxxxxxxxx>, "Chaotian Jing" <chaotian.jing@xxxxxxxxxxxx>, "Ulf Hansson" <ulf.hansson@xxxxxxxxxx>, "Rob Herring" <robh+dt@xxxxxxxxxx>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@xxxxxxxxxx>, "Matthias Brugger" <matthias.bgg@xxxxxxxxx>, "Wenbin Mei" <wenbin.mei@xxxxxxxxxxxx>, linux-mmc@xxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx
> Betreff: Re: [PATCH v3 3/7] dt-bindings: mmc: mtk-sd: add mt7986
>
> On 23/10/2022 05:12, Frank Wunderlich wrote:
> > From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> >
> > Add SoC specific section for defining clock configuration.
> >
> > Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
>
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Hi,
got another config from mtk which requires changing binding a bit
clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
<&infracfg CLK_INFRA_MSDC_HCK_CK>,
<&infracfg CLK_INFRA_MSDC_CK>,
<&infracfg CLK_INFRA_MSDC_133M_CK>,
<&infracfg CLK_INFRA_MSDC_66M_CK>;
clock-names = "source", "hclk", "source_cg", "bus_clk",
"sys_cg";
in binding:
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -241,15 +241,17 @@ allOf:
items:
- description: source clock
- description: HCLK which used for host
- - description: AXI bus clock gate
- - description: AHB bus clock gate
+ - description: independent source clock gate
+ - description: bus clock used for internal register access (required for MSDC0/3).
+ - description: msdc subsys clock gate
clock-names:
minItems: 3
items:
- const: source
- const: hclk
- - const: axi_cg
- - const: ahb_cg
+ - const: "source_cg"
+ - const: "bus_clk"
+ - const: "sys_cg"
will send an updated v4...old version was working but i should use the new one.
@Krzysztof can i take your RB here or should i leave it as Patch was changed?
regards Frank