[PATCH 2/3] docs: perf: Fix PMU instance name of hisi-pcie-pmu

[Yicong Yang]

From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>

The PMU instance will be called hisi_pcie<sicl>_core<core> rather than
hisi_pcie<sicl>_<core>. Fix this in the documentation.

Fixes: c8602008e247 ("docs: perf: Add description for HiSilicon PCIe PMU driver")
Signed-off-by: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
---
 .../admin-guide/perf/hisi-pcie-pmu.rst        | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
index 294ebbdb22af..bbe66480ff85 100644
--- a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
+++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -15,10 +15,10 @@ HiSilicon PCIe PMU driver
 The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe
 Core id.::
 
-  /sys/bus/event_source/hisi_pcie<sicl>_<core>
+  /sys/bus/event_source/hisi_pcie<sicl>_core<core>
 
 PMU driver provides description of available events and filter options in sysfs,
-see /sys/bus/event_source/devices/hisi_pcie<sicl>_<core>.
+see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>.
 
 The "format" directory describes all formats of the config (events) and config1
 (filter options) fields of the perf_event_attr structure. The "events" directory
@@ -33,13 +33,13 @@ monitored by PMU.
 Example usage of perf::
 
   $# perf list
-  hisi_pcie0_0/rx_mwr_latency/ [kernel PMU event]
-  hisi_pcie0_0/rx_mwr_cnt/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
   ------------------------------------------
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency/
-  $# perf stat -e hisi_pcie0_0/rx_mwr_cnt/
-  $# perf stat -g -e hisi_pcie0_0/rx_mwr_latency/ -e hisi_pcie0_0/rx_mwr_cnt/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
 
 The current driver does not support sampling. So "perf record" is unsupported.
 Also attach to a task is unsupported for PCIe PMU.
@@ -64,7 +64,7 @@ bit8 is set, port=0x100; if these two Root Ports are both monitored, port=0x101.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mwr_latency,port=0x1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
 
 -bdf
 
@@ -76,7 +76,7 @@ For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,bdf=0x3900/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
 
 2. Trigger filter
 Event statistics start when the first time TLP length is greater/smaller
@@ -90,7 +90,7 @@ means start when TLP length < condition.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
 
 3. Threshold filter
 Counter counts when TLP length within the specified range. You can set the
@@ -103,4 +103,4 @@ when TLP length < threshold.
 
 Example usage of perf::
 
-  $# perf stat -e hisi_pcie0_0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+  $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
-- 
2.24.0