[PATCH 0/3] arch: dts: specify the MDC frequency on Layerscape DPAA2 devices

[Ioana Ciornei]

Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.

This patch set adds the needed properties on all DPAA2 based SoCs.

Ioana Ciornei (3):
  arm64: dts: lx2160a: specify clock frequencies for the MDIO
    controllers
  arm64: dts: ls1088a: specify clock frequencies for the MDIO
    controllers
  arm64: dts: ls208xa: specify clock frequencies for the MDIO
    controllers

 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++
 3 files changed, 18 insertions(+)

-- 
2.25.1