Re: [PATCH v2 2/2] dt-bindings: soc: add loongson2 guts

[Krzysztof Kozlowski]

On 26/10/2022 03:22, Yinbo Zhu wrote:
> 
> 
> 在 2022/10/26 上午3:40, Krzysztof Kozlowski 写道:
>> On 24/10/2022 23:51, Yinbo Zhu wrote:
>>> Add the loongson2 soc guts driver binding with DT schema format
>>> using json-schema.
>>>
>>> Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
>>> ---
>>>   .../soc/loongson/loongson,ls2k-guts.yaml      | 37 +++++++++++++++++++
>>
>> Looks like wrong location, although difficult to judge because you did
>> not describe the hardware at all. If this is chipinfo-like device, then
>> Documentation/devicetree/bindings/hwinfo/.
> My guts driver is refer fsl platform. It was was to manage and access
> global utilities register block for SoC and it was only used in SoC
> platform. when driver need use Soc ops to do some function the this 
> driver was needed.  the dcfg (device config) was a function in guts 
> (global utilities) block.

I can barely understand it.

> For these type of driver, other platforms were initially placed on
> Documentation/devicetree/bindings/arm/   if it is arm/arm64
> architecture. Later, move it to the soc directory.
> 
> Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml

How is this related? This is Layerscape, not Loongson2. Describe the
hardware you are adding bindings for.

> 
> So, do you still think it is inappropriate to place it in the soc dir?
>>
>>
>>>   MAINTAINERS                                   |  1 +
>>>   2 files changed, 38 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-guts.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-guts.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-guts.yaml
>>> new file mode 100644
>>> index 000000000000..2502f8aeb74d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-guts.yaml
>>> @@ -0,0 +1,37 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-guts.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Loongson2 GUTS driver.
>>
>> Drop "driver." unless you refer to some hardware (like motor driver?).
> this need refer hardware soc datasheet to gain soc register (global 
> utilities register block ).
> so keep "driver" string that whether was more appropriate?

What? I cannot parse it.

Did you understand my comment? If yes, please point to Wikipedia article
explaining this "Driver" you refer to.


>>
>>> +
>>> +maintainers:
>>> +  - Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
>>> +
>>> +description: |
>>> +  GUTS driver was to manage and access global utilities block. Initially
>>
>> Drop "driver" and describe instead what is GUTS, including its acronym,
>>
>>> +  only reading SVR and registering soc device are supported.
>>
>> Entire sentence describe Linux driver - drop it. Instead describe the
>> device, the hardware.
>>
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: loongson,ls2k-guts
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  little-endian: true
>>> +
>>> +required:
>>> +  - compatible
>>> +  - reg
>>> +
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    guts: guts@1fe00000 {
>>
>> Node names should be generic.
> dcfg/scfg (device cfg/ soc cfg)was the key function of guts (global 
> utilities) block. and guts name I was refer fsl soc driver. 
> "drivers/soc/fsl/guts.c"
> this binding file was follows of fsl guts.
> Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
> Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
> 
> or, I was use scfg as node name, Do you think it's appropriate?

No, these are not generic node names.

> 
> 
>> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Best regards,
Krzysztof