Re: [PATCH v4 4/7] drm/vc4: hdmi: Fix hdmi_enable_4kp60 detection

[Dave Stevenson]

On Thu, 20 Oct 2022 at 10:14, <maxime@xxxxxxxxxx> wrote:
>
> In order to support higher HDMI frequencies, users have to set the
> hdmi_enable_4kp60 parameter in their config.txt file.
>
> We were detecting this so far by calling clk_round_rate() on the core
> clock with the frequency we're supposed to run at when one of those
> modes is enabled. Whether or not the parameter was enabled could then be
> inferred by the returned rate since the maximum clock rate reported by
> the firmware was one of the side effect of setting that parameter.
>
> However, the recent clock rework we did changed what clk_round_rate()
> was returning to always return the minimum allowed, and thus this test
> wasn't reliable anymore.
>
> Let's use the new clk_get_max_rate() function to reliably determine the
> maximum rate allowed on that clock and fix the 4k@60Hz output.
>
> Fixes: e9d6cea2af1c ("clk: bcm: rpi: Run some clocks at the minimum rate allowed")
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>

Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/vc4/vc4_hdmi.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 64f9feabf43e..87961d4de5aa 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -46,6 +46,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/rational.h>
>  #include <linux/reset.h>
> +#include <soc/bcm2835/raspberrypi-clocks.h>
>  #include <sound/dmaengine_pcm.h>
>  #include <sound/hdmi-codec.h>
>  #include <sound/pcm_drm_eld.h>
> @@ -3429,7 +3430,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
>
>         if (variant->max_pixel_clock == 600000000) {
>                 struct vc4_dev *vc4 = to_vc4_dev(drm);
> -               long max_rate = clk_round_rate(vc4->hvs->core_clk, 550000000);
> +               unsigned long max_rate = rpi_firmware_clk_get_max_rate(vc4->hvs->core_clk);
>
>                 if (max_rate < 550000000)
>                         vc4_hdmi->disable_4kp60 = true;
>
> --
> b4 0.10.1