[PATCH 1/4] arm64: dts: qcom: sm8450: move SDHCI pin configuration to DTSI

[Krzysztof Kozlowski]

The SDHCI pin configuration/mux nodes are actually common to all
upstreamed boards, so define them in SoC DTSI to reduce code
duplication.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

In theory drive strength belongs to the board DTS, not SoC DTSI, but I
am following the advice here:
https://lore.kernel.org/lkml/CAD=FV=VUL4GmjaibAMhKNdpEso_Hg_R=XeMaqah1LSj_9-Ce4Q@xxxxxxxxxxxxxx/
---
 .../qcom/sm8450-sony-xperia-nagara-pdx223.dts | 20 -------------------
 arch/arm64/boot/dts/qcom/sm8450.dtsi          | 20 +++++++++++++++++++
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index 82918c2d956f..718c690af8ad 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -572,26 +572,6 @@ &spi10 {
 &tlmm {
 	gpio-reserved-ranges = <28 4>;
 
-	sdc2_default_state: sdc2-default-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "sdc2_cmd";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "sdc2_data";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
 	ts_int_default: ts-int-default-state {
 		pins = "gpio23";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1d1775334575..1df5c964c6f7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -2515,6 +2515,26 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
 			sdc2_sleep_state: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";
-- 
2.34.1