RE: [PATCH v2] usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1

[Pawel Laszczak]

>
>On 22-10-24 10:04:35, Pawel Laszczak wrote:
>> Patch modifies the TD_SIZE in TRB before ZLP TRB.
>> The TD_SIZE in TRB before ZLP TRB must be set to 1 to force processing
>> ZLP TRB by controller.
>>
>> cc: <stable@xxxxxxxxxxxxxxx>
>> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence
>> USBSSP DRD Driver")
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>>
>> ---
>> Changelog:
>> v2:
>> - returned value for last TRB must be 0
>>
>>  drivers/usb/cdns3/cdnsp-ring.c | 7 ++++++-
>>  1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/cdns3/cdnsp-ring.c
>> b/drivers/usb/cdns3/cdnsp-ring.c index 04dfcaa08dc4..aa79bce89d8a
>> 100644
>> --- a/drivers/usb/cdns3/cdnsp-ring.c
>> +++ b/drivers/usb/cdns3/cdnsp-ring.c
>> @@ -1769,8 +1769,13 @@ static u32 cdnsp_td_remainder(struct
>> cdnsp_device *pdev,
>>
>>  	/* One TRB with a zero-length data packet. */
>>  	if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
>> -	    trb_buff_len == td_total_len)
>> +	    trb_buff_len == td_total_len) {
>> +		/* Before ZLP driver needs set TD_SIZE=1. */
>> +		if (more_trbs_coming)
>> +			return 1;
>> +
>>  		return 0;
>> +	}
>
>Does that fix the issue you want at bulk transfer, which has zero-length packet
>at the last packet? It seems not align with your previous fix.
>Would you mind explaining more?

Value returned by function cdnsp_td_remainder is used 
as TD_SIZE in TRB.

The last TRB in TD should have TD_SIZE=0, so trb for ZLP should have
set also TD_SIZE=0. If driver set TD_SIZE=0 on before the last one
TRB then the controller stops the transfer and ignore trb for ZLP packet.

To fix this, the driver in such case must set TD_SIZE = 1
before the last TRB. 

e.g.

TD -> TRB1  transfer_length = 64KB, TD_SIZE =0
          TRB2 transfer_length =0, TD_SIZE = 0  - controller will
		    ignore this transfer and stop transfer on previous one

TD -> TRB1  transfer_length = 64KB, TD_SIZE =1
          TRB2 transfer_length =0, TD_SIZE = 0  - controller will
		    execute this trb and send ZLP

As you noticed previously, previous fix for last TRB returned
TD_SIZE = 1 in some cases.
Previous fix was working correct but was not compliance with
controller specification.

>
>>
>>  	maxp = usb_endpoint_maxp(preq->pep->endpoint.desc);
>>  	total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
>> --
>> 2.25.1
>>
>
>--
>

Thanks,
Pawel Laszczak