Re: [PATCH 4/4] arm64: dts: uniphier: Add NX1 SoC and boards support

From: Arnd Bergmann
Date: Thu Oct 27 2022 - 06:02:31 EST


On Thu, Oct 27, 2022, at 06:51, Kunihiko Hayashi wrote:
> Initial version of devicetree sources for NX1 SoC and boards.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@xxxxxxxxxxxxx>

Can you add more information here? When new SoCs get added, I
usually provide more than this in my own pull requests sending
the patches to Linus, so please add some background here, such as:

- is this a new SoC, or or something that has been around for a while
and only now gets upstreamed?

- What is the target market for this SoC? Are there any products
one can buy with it?

- What type of CPU cores does it use, or any other noteworthy
IP blocks that are relevant for its purpose?

> + usb_hsphy0: hs-phy@200 {
> + compatible = "socionext,uniphier-nx1-usb3-hsphy";
> + reg = <0x200 0x10>;

> + usb_ssphy0: ss-phy@300 {
> + compatible = "socionext,uniphier-nx1-usb3-ssphy";
> + reg = <0x300 0x10>;

I think these are usually just named 'phy@' instead of 'hs-phy@'

> + ranges =
> + /* downstream I/O */
> + <0x81000000 0 0x00000000 0x0ffe0000 0 0x00010000>,
> + /* non-prefetchable memory */
> + <0x82000000 0 0x20000000 0x04200000 0 0x0bde0000>;

200MB of memory space is rather small, is there no 64-bit range?

> + #interrupt-cells = <1>;
> + interrupt-names = "dma", "msi";
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */
> + <0 0 0 2 &pcie_intc 1>, /* INTB */
> + <0 0 0 3 &pcie_intc 2>, /* INTC */
> + <0 0 0 4 &pcie_intc 3>; /* INTD */
> + phy-names = "pcie-phy";
> + phys = <&pcie_phy>;
> +
> + pcie_intc: legacy-interrupt-controller {
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };

Shouldn't there be an "msi-map" or "msi-parent" property pointing at
the GIC?

Arnd