Re: [PATCH v3 4/4] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs

From: Krzysztof Kozlowski
Date: Thu Oct 27 2022 - 11:23:29 EST


On 26/10/2022 16:04, Melody Olvera wrote:
> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
> SoCs.
>
> Signed-off-by: Melody Olvera <quic_molvera@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 245 +++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 245 +++++++++++++++++++++++
> 3 files changed, 492 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index b0558d3389e5..8ee949a58ce7 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> new file mode 100644
> index 000000000000..e4fd6e2b656b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> @@ -0,0 +1,245 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qdu1000.dtsi"
> +#include "pm8150.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QDU1000 IDP";
> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
> +
> + aliases {
> + serial0 = &uart7;
> + };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + clock-frequency = <19200000>;
> + clock-output-names = "xo_board";
> + #clock-cells = <0>;
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + ppvar_sys: ppvar-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvar_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&ppvar_sys>;
> + };
> +};
> +
> +&apps_rsc {
> + regulators {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> +
> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
> + vdd-l2-l10-supply = <&vph_pwr>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
> + vdd-l6-l9-supply = <&vreg_s6a_0p9>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
> + vdd-l13-l16-l17-supply = <&vph_pwr>;
> +
> + vreg_s2a_0p5: smps2 {
> + regulator-name = "vreg_s2a_0p5";
> + regulator-min-microvolt = <320000>;
> + regulator-max-microvolt = <570000>;
> + };
> +
> + vreg_s3a_1p05: smps3 {
> + regulator-name = "vreg_s3a_1p05";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1170000>;
> + };
> +
> + vreg_s4a_1p8: smps4 {
> + regulator-name = "vreg_s4a_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vreg_s5a_2p0: smps5 {
> + regulator-name = "vreg_s5a_2p0";
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2000000>;
> + };
> +
> + vreg_s6a_0p9: smps6 {
> + regulator-name = "vreg_s6a_0p9";
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1128000>;
> + };
> +
> + vreg_s7a_1p2: smps7 {
> + regulator-name = "vreg_s7a_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + vreg_s8a_1p3: smps8 {
> + regulator-name = "vreg_s8a_1p3";
> + regulator-min-microvolt = <1352000>;
> + regulator-max-microvolt = <1352000>;
> + };
> +
> + vreg_l1a_0p91: ldo1 {
> + regulator-name = "vreg_l1a_0p91";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l2a_2p3: ldo2 {
> + regulator-name = "vreg_l2a_2p3";
> + regulator-min-microvolt = <2970000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l3a_1p2: ldo3 {
> + regulator-name = "vreg_l3a_1p2";
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l5a_0p8: ldo5 {
> + regulator-name = "vreg_l5a_0p8";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l6a_0p91: ldo6 {
> + regulator-name = "vreg_l6a_0p91";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l7a_1p8: ldo7 {
> + regulator-name = "vreg_l7a_1p8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +
> + };
> +
> + vreg_l8a_0p91: ldo8 {
> + regulator-name = "vreg_l8a_0p91";
> + regulator-min-microvolt = <888000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l9a_0p91: ldo9 {
> + regulator-name = "vreg_l8a_0p91";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l10a_2p95: ldo10 {
> + regulator-name = "vreg_l10a_2p95";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l11a_0p91: ldo11 {
> + regulator-name = "vreg_l11a_0p91";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l12a_1p8: ldo12 {
> + regulator-name = "vreg_l12a_1p8";
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <1504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l14a_1p8: ldo14 {
> + regulator-name = "vreg_l14a_1p8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l15a_1p8: ldo15 {
> + regulator-name = "vreg_l15a_1p8";
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l16a_1p8: ldo16 {
> + regulator-name = "vreg_l16a_1p8";
> + regulator-min-microvolt = <1710000>;
> + regulator-max-microvolt = <1890000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l17a_3p3: ldo17 {
> + regulator-name = "vreg_l17a_3p3";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l18a_1p2: ldo18 {
> + regulator-name = "vreg_l18a_1p2";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> + };
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&uart7 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
> new file mode 100644
> index 000000000000..445124e84485
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
> @@ -0,0 +1,245 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "qru1000.dtsi"
> +#include "pm8150.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QRU1000 IDP";
> + compatible = "qcom,qru1000-idp", "qcom,qru1000";
> +
> + aliases {
> + serial0 = &uart7;
> + };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + clock-frequency = <19200000>;
> + clock-output-names = "xo_board";
> + #clock-cells = <0>;
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + ppvar_sys: ppvar-sys-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvar_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&ppvar_sys>;
> + };
> +};
> +
> +&apps_rsc {
> + regulators {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-s9-supply = <&vph_pwr>;
> + vdd-s10-supply = <&vph_pwr>;
> +
> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
> + vdd-l2-l10-supply = <&vph_pwr>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
> + vdd-l6-l9-supply = <&vreg_s6a_0p9>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
> + vdd-l13-l16-l17-supply = <&vph_pwr>;
> +
> + vreg_s2a_0p5: smps2 {
> + regulator-name = "vreg_s2a_0p5";
> + regulator-min-microvolt = <320000>;
> + regulator-max-microvolt = <570000>;
> + };
> +
> + vreg_s3a_1p05: smps3 {
> + regulator-name = "vreg_s3a_1p05";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1170000>;
> + };
> +
> + vreg_s4a_1p8: smps4 {
> + regulator-name = "vreg_s4a_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vreg_s5a_2p0: smps5 {
> + regulator-name = "vreg_s5a_2p0";
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2000000>;
> + };
> +
> + vreg_s6a_0p9: smps6 {
> + regulator-name = "vreg_s6a_0p9";
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1128000>;
> + };
> +
> + vreg_s7a_1p2: smps7 {
> + regulator-name = "vreg_s7a_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + vreg_s8a_1p3: smps8 {
> + regulator-name = "vreg_s8a_1p3";
> + regulator-min-microvolt = <1352000>;
> + regulator-max-microvolt = <1352000>;
> + };
> +
> + vreg_l1a_0p91: ldo1 {
> + regulator-name = "vreg_l1a_0p91";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l2a_2p3: ldo2 {
> + regulator-name = "vreg_l2a_2p3";
> + regulator-min-microvolt = <2970000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l3a_1p2: ldo3 {
> + regulator-name = "vreg_l3a_1p2";
> + regulator-min-microvolt = <920000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l5a_0p8: ldo5 {
> + regulator-name = "vreg_l5a_0p8";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l6a_0p91: ldo6 {
> + regulator-name = "vreg_l6a_0p91";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l7a_1p8: ldo7 {
> + regulator-name = "vreg_l7a_1p8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> +
> + };
> +
> + vreg_l8a_0p91: ldo8 {
> + regulator-name = "vreg_l8a_0p91";
> + regulator-min-microvolt = <888000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l9a_0p91: ldo9 {
> + regulator-name = "vreg_l8a_0p91";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l10a_2p95: ldo10 {
> + regulator-name = "vreg_l10a_2p95";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l11a_0p91: ldo11 {
> + regulator-name = "vreg_l11a_0p91";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l12a_1p8: ldo12 {
> + regulator-name = "vreg_l12a_1p8";
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <1504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l14a_1p8: ldo14 {
> + regulator-name = "vreg_l14a_1p8";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <1950000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l15a_1p8: ldo15 {
> + regulator-name = "vreg_l15a_1p8";
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l16a_1p8: ldo16 {
> + regulator-name = "vreg_l16a_1p8";
> + regulator-min-microvolt = <1710000>;
> + regulator-max-microvolt = <1890000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l17a_3p3: ldo17 {
> + regulator-name = "vreg_l17a_3p3";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> +
> + vreg_l18a_1p2: ldo18 {
> + regulator-name = "vreg_l18a_1p2";
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
> + };
> + };
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&uart7 {
> + status = "okay";
> +};

Best regards,
Krzysztof