Re: [PATCH v1 8/9] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

[Bjorn Andersson]

On Fri, Oct 28, 2022 at 02:08:11PM +0200, Robert Foss wrote:
> Enable the display subsystem and the dsi0 output for
> the sm8350-hdk board.
> 
> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index e6deb08c6da0..6e07feb4b3b2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -213,10 +213,32 @@ &cdsp {
>  	firmware-name = "qcom/sm8350/cdsp.mbn";
>  };
>  
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&dsi0 {

If you prefix the label for the dsi controller and phy with mdss_ they
sort nicely together with the other display nodes.

Regards,
Bjorn

> +	status = "okay";
> +	vdda-supply = <&vreg_l6b_1p2>;
> +};
> +
> +&dsi0_phy  {
> +	status = "okay";
> +	vdds-supply = <&vreg_l5b_0p88>;
> +};
> +
>  &gpi_dma1 {
>  	status = "okay";
>  };
>  
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_mdp {
> +	status = "okay";
> +};
> +
>  &mpss {
>  	status = "okay";
>  	firmware-name = "qcom/sm8350/modem.mbn";
> -- 
> 2.34.1
>