[PATCH v14 1/7] PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning

[Frank Li]

From: Frank Li <frank.li@xxxxxxx>

Cleanup warning found by scripts/kernel-doc
Consolidate term
    host, host1 to HOST
    vhost, vHost, Vhost, VHOST2 to VHOST

Signed-off-by: Frank Li <frank.li@xxxxxxx>
---
 drivers/pci/endpoint/functions/pci-epf-vntb.c | 83 ++++++++++++-------
 1 file changed, 54 insertions(+), 29 deletions(-)

diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
index 0ea85e1d292e..c0115bcb3b5e 100644
--- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
+++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
@@ -11,7 +11,7 @@
  * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
  */
 
-/**
+/*
  * +------------+         +---------------------------------------+
  * |            |         |                                       |
  * +------------+         |                        +--------------+
@@ -156,12 +156,14 @@ static struct pci_epf_header epf_ntb_header = {
 };
 
 /**
- * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host
+ * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host (VHOST)
  * @ntb: NTB device that facilitates communication between HOST and VHOST
  * @link_up: true or false indicating Link is UP or Down
  *
  * Once NTB function in HOST invoke ntb_link_enable(),
- * this NTB function driver will trigger a link event to vhost.
+ * this NTB function driver will trigger a link event to VHOST.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
 {
@@ -175,9 +177,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
 }
 
 /**
- * epf_ntb_configure_mw() - Configure the Outbound Address Space for vhost
- *   to access the memory window of host
- * @ntb: NTB device that facilitates communication between host and vhost
+ * epf_ntb_configure_mw() - Configure the Outbound Address Space for VHOST
+ *   to access the memory window of HOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  * @mw: Index of the memory window (either 0, 1, 2 or 3)
  *
  *                          EP Outbound Window
@@ -194,7 +196,9 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
  * |        |              |           |
  * |        |              |           |
  * +--------+              +-----------+
- *  VHost                   PCI EP
+ *  VHOST                   PCI EP
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
 {
@@ -219,7 +223,7 @@ static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
 
 /**
  * epf_ntb_teardown_mw() - Teardown the configured OB ATU
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  * @mw: Index of the memory window (either 0, 1, 2 or 3)
  *
  * Teardown the configured OB ATU configured in epf_ntb_configure_mw() using
@@ -234,12 +238,12 @@ static void epf_ntb_teardown_mw(struct epf_ntb *ntb, u32 mw)
 }
 
 /**
- * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
+ * epf_ntb_cmd_handler() - Handle commands provided by the NTB HOST
  * @work: work_struct for the epf_ntb_epc
  *
  * Workqueue function that gets invoked for the two epf_ntb_epc
  * periodically (once every 5ms) to see if it has received any commands
- * from NTB host. The host can send commands to configure doorbell or
+ * from NTB HOST. The HOST can send commands to configure doorbell or
  * configure memory window or to update link status.
  */
 static void epf_ntb_cmd_handler(struct work_struct *work)
@@ -321,8 +325,8 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
 
 /**
  * epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
- * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
- *	     address.
+ * @ntb: EPC associated with one of the HOST which holds peer's outbound
+ *	 address.
  *
  * Clear BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
  * self scratchpad region (removes inbound ATU configuration). While BAR0 is
@@ -331,8 +335,10 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
  * used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
  *
  * Please note the self scratchpad region and config region is combined to
- * a single region and mapped using the same BAR. Also note HOST2's peer
- * scratchpad is HOST1's self scratchpad.
+ * a single region and mapped using the same BAR. Also note VHOST's peer
+ * scratchpad is HOST's self scratchpad.
+ *
+ * Returns: void
  */
 static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
 {
@@ -347,13 +353,15 @@ static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
 
 /**
  * epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
- * Map BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
+ * Map BAR0 of EP CONTROLLER which contains the VHOST's config and
  * self scratchpad region.
  *
  * Please note the self scratchpad region and config region is combined to
  * a single region and mapped using the same BAR.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
 {
@@ -380,7 +388,7 @@ static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
 /**
  * epf_ntb_config_spad_bar_free() - Free the physical memory associated with
  *   config + scratchpad region
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  */
 static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
 {
@@ -393,11 +401,13 @@ static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
 /**
  * epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad
  *   region
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
  * Allocate the Local Memory mentioned in the above diagram. The size of
  * CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of SCRATCHPAD REGION
  * is obtained from "spad-count" configfs entry.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
 {
@@ -465,11 +475,13 @@ static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
 }
 
 /**
- * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
  * Configure MSI/MSI-X capability for each interface with number of
  * interrupts equal to "db_count" configfs entry.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
 {
@@ -511,7 +523,9 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
 
 /**
  * epf_ntb_db_bar_init() - Configure Doorbell window BARs
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
 {
@@ -566,7 +580,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws);
 /**
  * epf_ntb_db_bar_clear() - Clear doorbell BAR and free memory
  *   allocated in peer's outbound address space
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  */
 static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
 {
@@ -582,8 +596,9 @@ static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
 
 /**
  * epf_ntb_mw_bar_init() - Configure Memory window BARs
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
 {
@@ -639,7 +654,7 @@ static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
 
 /**
  * epf_ntb_mw_bar_clear() - Clear Memory window BARs
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  */
 static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
 {
@@ -662,7 +677,7 @@ static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb, int num_mws)
 
 /**
  * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
  * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
  */
@@ -675,7 +690,9 @@ static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
 /**
  * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
  * constructs (scratchpad region, doorbell, memorywindow)
- * @ntb: NTB device that facilitates communication between HOST and vHOST
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
 {
@@ -716,11 +733,13 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
 
 /**
  * epf_ntb_epc_init() - Initialize NTB interface
- * @ntb: NTB device that facilitates communication between HOST and vHOST2
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
  * Wrapper to initialize a particular EPC interface and start the workqueue
- * to check for commands from host. This function will write to the
+ * to check for commands from HOST. This function will write to the
  * EP controller HW for configuring it.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_epc_init(struct epf_ntb *ntb)
 {
@@ -787,7 +806,7 @@ static int epf_ntb_epc_init(struct epf_ntb *ntb)
 
 /**
  * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
- * @ntb: NTB device that facilitates communication between HOST1 and HOST2
+ * @ntb: NTB device that facilitates communication between HOST and VHOST
  *
  * Wrapper to cleanup all NTB interfaces.
  */
@@ -951,6 +970,8 @@ static const struct config_item_type ntb_group_type = {
  *
  * Add configfs directory specific to NTB. This directory will hold
  * NTB specific properties like db_count, spad_count, num_mws etc.,
+ *
+ * Returns: Pointer to config_group
  */
 static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
 					    struct config_group *group)
@@ -1292,6 +1313,8 @@ static struct pci_driver vntb_pci_driver = {
  * Invoked when a primary interface or secondary interface is bound to EPC
  * device. This function will succeed only when EPC is bound to both the
  * interfaces.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_bind(struct pci_epf *epf)
 {
@@ -1377,6 +1400,8 @@ static struct pci_epf_ops epf_ntb_ops = {
  *
  * Probe NTB function driver when endpoint function bus detects a NTB
  * endpoint function.
+ *
+ * Returns: Zero for success, or an error code in case of failure
  */
 static int epf_ntb_probe(struct pci_epf *epf)
 {
-- 
2.34.1