Re: [PATCH 0/3] arch: dts: specify the MDC frequency on Layerscape DPAA2 devices

[Shawn Guo]

On Tue, Oct 25, 2022 at 05:41:14PM +0300, Ioana Ciornei wrote:
> Up until now, the external MDIO controller frequency values relied
> either on the default ones out of reset or on those setup by u-boot.
> Let's just properly specify the MDC frequency in the DTS so that even
> without u-boot's intervention Linux can drive the MDIO bus.
> 
> This patch set adds the needed properties on all DPAA2 based SoCs.
> 
> Ioana Ciornei (3):
>   arm64: dts: lx2160a: specify clock frequencies for the MDIO
>     controllers
>   arm64: dts: ls1088a: specify clock frequencies for the MDIO
>     controllers
>   arm64: dts: ls208xa: specify clock frequencies for the MDIO
>     controllers

Applied all, thanks!