Re: [PATCH v5 0/3] iio: Support ROHM/Kionix kx022a

[Jonathan Cameron]

On Mon, 24 Oct 2022 15:37:57 +0300
Matti Vaittinen <mazziesaccount@xxxxxxxxx> wrote:

> Add initial support for ROHM/Kionix kx022a accelerometer

Series applied with minor tweaks as per individual replies +
Andy's RB found and added.

Applied to the togreg branch of iio.git and pushed out initially as
testing to see if 0-day can find anything we missed before I make
a mess of linux-next.

Thanks,

Jonathan

> 
> About the HW:
> KX022A accelerometer is a sensor which:
> 	- supports G-ranges of (+/-) 2, 4, 8, and 16G
> 	- can be connected to I2C or SPI
> 	- has internal HW FIFO buffer
> 	- supports various ODRs (output data rates)
> 	- support detecting special events like double tap or motion
> 	- can be configured to wake-up system when events are detected.
> 
> About the series:
> 
> This series adds support for only getting the accelerometer data and
> configuring the G-range / ODR via IIO. Motion detection or double-tap
> detection are not supported by the series. The other quite important but
> still missing piece is the runtime PM. Nevertheless, the driver should be
> usable and brings the basic support for getting accelerometer data.
> 
> Changelog v5:
> 	- KX022A: styling/print fixes.
> 	- KX022A: fix race for requesting IRQ/populating user-space
> 	  entries.
> 	- KX022A: fix few variable types
> 	- KX022A: drop unnecessary udelay()
> 	- MAINTAINERS: Change myself to be a maintainer.
> 
> Changelog v4: (More detailed log in individual patches)
> 	- KX022A: mostly styling/print fixes.
> 	- KX022A: fix return value from IRQ thread handler.
> 
> Changelog v3: (More detailed log in individual patches)
> 	- dt-bindings: fixed as suggested by Krzysztof
> 	- KX022A: multiple fixes as suggested by Andy
> 		- Fair to mention that couple of suggested changes are
> 		  not done (Some styling, boilerplate text in KConfig)
> 		  as there has been no consensus whether the suggested
> 		  changes improve situation. Ultimately the decision
> 		  whether these changes are mandatory lay on the
> 		  shoulders of the maintainers... Sorry for that.
> 	- Enable the FIFO without module param now that the "FIFO stuck"
> 	  issue can be prevented.
> 	- Fix potential race with time-stamp calculation when user-space
> 	  invokes the fifo flush.
> 	- Drop the already merged regulator patches.
> 
> Changelog v2: (More detailed log in individual patches)
> 	- dt-bindings: fixed as suggested by Krzysztof
> 	- dt-bindings: support both INT1 and INT2
> 	- KX022A: multiple fixes as suggested by Jonathan
> 	- fixed SPI driver after some testing
> 
> ---
> 
> Matti Vaittinen (3):
>   dt-bindings: iio: Add KX022A accelerometer
>   iio: accel: Support Kionix/ROHM KX022A accelerometer
>   MAINTAINERS: Add KX022A maintainer entry
> 
>  .../bindings/iio/accel/kionix,kx022a.yaml     |   65 +
>  MAINTAINERS                                   |    5 +
>  drivers/iio/accel/Kconfig                     |   21 +
>  drivers/iio/accel/Makefile                    |    3 +
>  drivers/iio/accel/kionix-kx022a-i2c.c         |   51 +
>  drivers/iio/accel/kionix-kx022a-spi.c         |   58 +
>  drivers/iio/accel/kionix-kx022a.c             | 1142 +++++++++++++++++
>  drivers/iio/accel/kionix-kx022a.h             |   82 ++
>  8 files changed, 1427 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
>  create mode 100644 drivers/iio/accel/kionix-kx022a-i2c.c
>  create mode 100644 drivers/iio/accel/kionix-kx022a-spi.c
>  create mode 100644 drivers/iio/accel/kionix-kx022a.c
>  create mode 100644 drivers/iio/accel/kionix-kx022a.h
> 
> 
> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780