[PATCH 2/2] ata: ahci (gcc13): use U suffix for enum definitions

[Jiri Slaby (SUSE)]

gcc13 now uses the type of the enum for all its members [1]. Given the
ata enum defines its members using both unsigned and signed ints, the
type of the enum is promoted to long.

Make sure the rest of the members are unsigned ints using U suffix.

The error in question is for example this:
  drivers/block/mtip32xx/mtip32xx.c:722:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long in'

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113

Cc: Martin Liska <mliska@xxxxxxx>
Cc: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
Cc: linux-ide@xxxxxxxxxxxxxxx
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@xxxxxxxxxx>
---
 drivers/ata/ahci.h | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 94b5c81f08dd..14eb6e97f6f7 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -39,7 +39,7 @@
 enum {
 	AHCI_MAX_PORTS		= 32,
 	AHCI_MAX_SG		= 168, /* hardware max is 64K */
-	AHCI_DMA_BOUNDARY	= 0xffffffff,
+	AHCI_DMA_BOUNDARY	= ~0U,
 	AHCI_MAX_CMDS		= 32,
 	AHCI_CMD_SZ		= 32,
 	AHCI_CMD_SLOT_SZ	= AHCI_MAX_CMDS * AHCI_CMD_SZ,
@@ -178,10 +178,10 @@ enum {
 	PORT_CMD_SPIN_UP	= BIT(1), /* Spin up device */
 	PORT_CMD_START		= BIT(0), /* Enable port DMA engine */
 
-	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
-	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
-	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
-	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
+	PORT_CMD_ICC_MASK	= (0xfU << 28), /* i/f ICC state mask */
+	PORT_CMD_ICC_ACTIVE	= (0x1U << 28), /* Put i/f in active state */
+	PORT_CMD_ICC_PARTIAL	= (0x2U << 28), /* Put i/f in partial state */
+	PORT_CMD_ICC_SLUMBER	= (0x6U << 28), /* Put i/f in slumber state */
 
 	/* PORT_CMD capabilities mask */
 	PORT_CMD_CAP		= PORT_CMD_HPCP | PORT_CMD_MPSP |
@@ -191,14 +191,14 @@ enum {
 	PORT_FBS_DWE_OFFSET	= 16, /* FBS device with error offset */
 	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
 	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
-	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
+	PORT_FBS_DEV_MASK	= (0xfU << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
 	PORT_FBS_SDE		= BIT(2), /* FBS single device error */
 	PORT_FBS_DEC		= BIT(1), /* FBS device error clear */
 	PORT_FBS_EN		= BIT(0), /* Enable FBS */
 
 	/* PORT_DEVSLP bits */
 	PORT_DEVSLP_DM_OFFSET	= 25,             /* DITO multiplier offset */
-	PORT_DEVSLP_DM_MASK	= (0xf << 25),    /* DITO multiplier mask */
+	PORT_DEVSLP_DM_MASK	= (0xfU << 25),    /* DITO multiplier mask */
 	PORT_DEVSLP_DITO_OFFSET	= 15,             /* DITO offset */
 	PORT_DEVSLP_MDAT_OFFSET	= 10,             /* Minimum assertion time */
 	PORT_DEVSLP_DETO_OFFSET	= 2,              /* DevSlp exit timeout */
-- 
2.38.1