Re: [PATCH 0/3] nvmem: stm32: add OP-TEE support for STM32MP13x

[Srinivas Kandagatla]

On 28/10/2022 15:52, Patrick Delaunay wrote:
> This serie update the NVMEM BSEC driver to be compatible with STM32MP13x
> SoC and the trusted application STM32MP BSEC in OP-TEE
>
> This serie solve issue in initial support of STM32MP131
> (using BSEC STM32MP15 compatible) and so it break the DTS compatible.
>
> I create this serie for more efficient review.
>
> The 2 first patches of this series are re-sent of patches already sent
>
> 1- "dt-bindings: nvmem: add new stm32mp13 compatible for stm32-romem"
>      https://lore.kernel.org/all/20221014172324.1.Ifc1812116ff63f5501f3edd155d3cf5c0ecc846c@changeid/
>      https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=685403
>
> 2- "ARM: dts: stm32mp13: fix compatible for BSEC"
>      https://lore.kernel.org/all/20221017134437.1.I167a5efc1f8777cce14518c6fa38400ac684de3e@changeid/
>      https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=685815
>
> This DTS break is acceptable as
> - the STM32MP13x SoC is not yet available outside STMicroelectronics
>    (not official)
> - the same patch is already integrated or modifications are in progress in
>    the other users (arm-trusted-firmware/TF-A, OP-TEE and U-Boot) of
>    stm32mp131 device tree.
>
> It is the good time to correct this issue before the real availability of
> the SoC and before full support of SoC in Linux kernel.
>
> This last patch on NVMEM STM32 ROMEM driver in depend on the preliminary
> patch for the driver:
>
>    "nvmem: stm32: move STM32MP15_BSEC_NUM_LOWER in config"
>    https://lore.kernel.org/all/20221017174953.v2.1.I95e71328dd654723bd4c57206bd008ff81c726bb@changeid/
>
> present in the serie
>
>    "nvmem: stm32: several minor improvements"
>    https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=685886
>
> Regards
>
> Patrick
>
> Changes in v1:
> - update commit message to indicate DTS break reason.
>
> Patrick Delaunay (3):
>    dt-bindings: nvmem: add new stm32mp13 compatible for stm32-romem
>    ARM: dts: stm32mp13: fix compatible for BSEC
>    nvmem: stm32: add OP-TEE support for STM32MP13x

Applied 1/3 and 3/3 thanks,

dts changes need to go via the dts maintainer..

--srini
>   .../bindings/nvmem/st,stm32-romem.yaml        |   1 +
>   arch/arm/boot/dts/stm32mp131.dtsi             |   2 +-
>   drivers/nvmem/stm32-romem.c                   | 450 +++++++++++++++++-
>   3 files changed, 448 insertions(+), 5 deletions(-)