[PATCH v2 2/3] dt-bindings: regulator: Add regulator-output binding

[Zev Weiss]

This describes a power output supplied by a regulator, such as a
power outlet on a power distribution unit (PDU).

Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
---

Changes since v1:
 - removed 'regulator-leave-on' property

 .../bindings/regulator/regulator-output.yaml  | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/regulator-output.yaml

diff --git a/Documentation/devicetree/bindings/regulator/regulator-output.yaml b/Documentation/devicetree/bindings/regulator/regulator-output.yaml
new file mode 100644
index 000000000000..078b37a1a71a
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator-output.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/regulator/regulator-output.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator output connector
+
+maintainers:
+  - Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
+
+description: |
+  This describes a power output connector supplied by a regulator,
+  such as a power outlet on a power distribution unit (PDU).  The
+  connector may be standalone or merely one channel or set of pins
+  within a ganged physical connector carrying multiple independent
+  power outputs.
+
+properties:
+  compatible:
+    const: regulator-output
+
+  vout-supply:
+    description:
+      Phandle of the regulator supplying the output.
+
+required:
+  - compatible
+  - vout-supply
+
+additionalProperties: false
+
+examples:
+  - |
+      output {
+          compatible = "regulator-output";
+          vout-supply = <&output_reg>;
+      };
-- 
2.38.1