Re: [PATCH v3] PCI: loongson: skip scanning unavailable child device

[Bjorn Helgaas]

Capitalize subject line to match other commits:

  930c6074d7dd ("PCI: loongson: Work around LS7A incorrect Interrupt Pin registers")
  2410e3301fcc ("PCI: loongson: Don't access non-existent devices")
  cd89edda4002 ("PCI: loongson: Add ACPI init support")
  dee449aafd48 ("PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A")

On Fri, Nov 04, 2022 at 06:53:40PM +0800, Liu Peibao wrote:
> The PCI Controller of 2k1000 could not mask devices by
> setting vender id or device id in configuration space header
> as invalid values. When there are pins shareble between
> the platform device and PCI device, if the platform device
> is preferred, we should not scan this PCI device. In the
> above scene, add `status = "disabled"` property in DT node
> of this PCI device.

Rewrap this to fill 75 columns.

s/id/ID/
s/shareble/shareable/

> Signed-off-by: Liu Peibao <liupeibao@xxxxxxxxxxx>
> ---
> V2 -> V3: 1. use list_for_each_entry() for more clearly.
>           2. fix wrong use of sizeof().
> V1 -> V2: use existing property "status" instead of adding new property.
> 
> 
>  drivers/pci/controller/pci-loongson.c | 55 +++++++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
> 
> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
> index 05c50408f13b..c7dd88eac885 100644
> --- a/drivers/pci/controller/pci-loongson.c
> +++ b/drivers/pci/controller/pci-loongson.c
> @@ -40,11 +40,21 @@ struct loongson_pci_data {
>  	struct pci_ops *ops;
>  };
>  
> +#ifdef CONFIG_OF
> +struct mask_entry {
> +	struct list_head entry;
> +	unsigned int devfn;
> +};
> +#endif
> +
>  struct loongson_pci {
>  	void __iomem *cfg0_base;
>  	void __iomem *cfg1_base;
>  	struct platform_device *pdev;
>  	const struct loongson_pci_data *data;
> +#ifdef CONFIG_OF
> +	struct list_head masklist;
> +#endif
>  };
>  
>  /* Fixup wrong class code in PCIe bridges */
> @@ -194,6 +204,18 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus,
>  			return NULL;
>  	}
>  
> +#ifdef CONFIG_OF
> +	/* Don't access devices in masklist */
> +	if (pci_is_root_bus(bus)) {
> +		struct mask_entry *entry;
> +
> +		list_for_each_entry(entry, &priv->masklist, entry) {
> +			if (devfn == entry->devfn)
> +				return NULL;
> +		}
> +	}
> +#endif

I would probably get rid of the masklist and just search for a disabled
property when reading config offset 0 (vendor ID).  That's not a
performance path anyway.  And this seems similar to the
FLAG_DEV_HIDDEN path where you probably don't need to do it for all
controllers.

>  	/* CFG0 can only access standard space */
>  	if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
>  		return cfg0_map(priv, bus, devfn, where);
> @@ -206,6 +228,36 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus,
>  }
>  
>  #ifdef CONFIG_OF
> +static int setup_masklist(struct loongson_pci *priv)
> +{
> +	struct device *dev = &priv->pdev->dev;
> +	struct device_node *dn, *parent = dev->of_node;
> +	struct mask_entry *entry;
> +	int devfn;
> +
> +	INIT_LIST_HEAD(&priv->masklist);
> +
> +	for_each_child_of_node(parent, dn) {
> +		/*
> +		 * if device is not available, add this to masklist
> +		 * to avoid scanning it.
> +		 */
> +		if (!of_device_is_available(dn)) {
> +			devfn = of_pci_get_devfn(dn);
> +			if (devfn < 0)
> +				continue;
> +
> +			entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL);
> +			if (!entry)
> +				return -ENOMEM;
> +
> +			entry->devfn = devfn;
> +			list_add_tail(&entry->entry, &priv->masklist);
> +		}
> +	}
> +
> +	return 0;
> +}
>  
>  static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
>  {
> @@ -305,6 +357,9 @@ static int loongson_pci_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	if (setup_masklist(priv))
> +		return -ENOMEM;
> +
>  	bridge->sysdata = priv;
>  	bridge->ops = priv->data->ops;
>  	bridge->map_irq = loongson_map_irq;
> -- 
> 2.20.1
>