[tip: x86/boot] x86/boot/compressed: Move efi32_pe_entry() out of head_64.S

[tip-bot2 for Ard Biesheuvel]

The following commit has been merged into the x86/boot branch of tip:

Commit-ID:     7f22ca396778fea9332d83ec2359dbe8396e9a06
Gitweb:        https://git.kernel.org/tip/7f22ca396778fea9332d83ec2359dbe8396e9a06
Author:        Ard Biesheuvel <ardb@xxxxxxxxxx>
AuthorDate:    Tue, 22 Nov 2022 17:10:06 +01:00
Committer:     Borislav Petkov <bp@xxxxxxx>
CommitterDate: Tue, 22 Nov 2022 19:24:57 +01:00

x86/boot/compressed: Move efi32_pe_entry() out of head_64.S

Move the implementation of efi32_pe_entry() into efi-mixed.S, which is a
more suitable location that only gets built if EFI mixed mode is
actually enabled.

Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Link: https://lore.kernel.org/r/20221122161017.2426828-7-ardb@xxxxxxxxxx
---
 arch/x86/boot/compressed/efi_mixed.S | 82 +++++++++++++++++++++++++-
 arch/x86/boot/compressed/head_64.S   | 87 +---------------------------
 2 files changed, 83 insertions(+), 86 deletions(-)

diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S
index 3487484..8844d8e 100644
--- a/arch/x86/boot/compressed/efi_mixed.S
+++ b/arch/x86/boot/compressed/efi_mixed.S
@@ -257,6 +257,88 @@ SYM_FUNC_START(efi32_entry)
 	jmp	startup_32
 SYM_FUNC_END(efi32_entry)
 
+#define ST32_boottime		60 // offsetof(efi_system_table_32_t, boottime)
+#define BS32_handle_protocol	88 // offsetof(efi_boot_services_32_t, handle_protocol)
+#define LI32_image_base		32 // offsetof(efi_loaded_image_32_t, image_base)
+
+/*
+ * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
+ *			       efi_system_table_32_t *sys_table)
+ */
+SYM_FUNC_START(efi32_pe_entry)
+	pushl	%ebp
+	movl	%esp, %ebp
+	pushl	%eax				// dummy push to allocate loaded_image
+
+	pushl	%ebx				// save callee-save registers
+	pushl	%edi
+
+	call	verify_cpu			// check for long mode support
+	testl	%eax, %eax
+	movl	$0x80000003, %eax		// EFI_UNSUPPORTED
+	jnz	2f
+
+	call	1f
+1:	pop	%ebx
+
+	/* Get the loaded image protocol pointer from the image handle */
+	leal	-4(%ebp), %eax
+	pushl	%eax				// &loaded_image
+	leal	(loaded_image_proto - 1b)(%ebx), %eax
+	pushl	%eax				// pass the GUID address
+	pushl	8(%ebp)				// pass the image handle
+
+	/*
+	 * Note the alignment of the stack frame.
+	 *   sys_table
+	 *   handle             <-- 16-byte aligned on entry by ABI
+	 *   return address
+	 *   frame pointer
+	 *   loaded_image       <-- local variable
+	 *   saved %ebx		<-- 16-byte aligned here
+	 *   saved %edi
+	 *   &loaded_image
+	 *   &loaded_image_proto
+	 *   handle             <-- 16-byte aligned for call to handle_protocol
+	 */
+
+	movl	12(%ebp), %eax			// sys_table
+	movl	ST32_boottime(%eax), %eax	// sys_table->boottime
+	call	*BS32_handle_protocol(%eax)	// sys_table->boottime->handle_protocol
+	addl	$12, %esp			// restore argument space
+	testl	%eax, %eax
+	jnz	2f
+
+	movl	8(%ebp), %ecx			// image_handle
+	movl	12(%ebp), %edx			// sys_table
+	movl	-4(%ebp), %esi			// loaded_image
+	movl	LI32_image_base(%esi), %esi	// loaded_image->image_base
+	leal	(startup_32 - 1b)(%ebx), %ebp	// runtime address of startup_32
+	/*
+	 * We need to set the image_offset variable here since startup_32() will
+	 * use it before we get to the 64-bit efi_pe_entry() in C code.
+	 */
+	subl	%esi, %ebp			// calculate image_offset
+	movl	%ebp, (image_offset - 1b)(%ebx)	// save image_offset
+	xorl	%esi, %esi
+	jmp	efi32_entry			// pass %ecx, %edx, %esi
+						// no other registers remain live
+
+2:	popl	%edi				// restore callee-save registers
+	popl	%ebx
+	leave
+	RET
+SYM_FUNC_END(efi32_pe_entry)
+
+	.section ".rodata"
+	/* EFI loaded image protocol GUID */
+	.balign 4
+SYM_DATA_START_LOCAL(loaded_image_proto)
+	.long	0x5b1b31a1
+	.word	0x9562, 0x11d2
+	.byte	0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
+SYM_DATA_END(loaded_image_proto)
+
 	.data
 	.balign	8
 SYM_DATA_START_LOCAL(efi32_boot_gdt)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 9cd2a28..36f37f9 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -673,6 +673,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode)
 	jmp     1b
 SYM_FUNC_END(.Lno_longmode)
 
+	.globl	verify_cpu
 #include "../../kernel/verify_cpu.S"
 
 	.data
@@ -720,92 +721,6 @@ SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end)
 #ifdef CONFIG_EFI_STUB
 SYM_DATA(image_offset, .long 0)
 #endif
-#ifdef CONFIG_EFI_MIXED
-#define ST32_boottime		60 // offsetof(efi_system_table_32_t, boottime)
-#define BS32_handle_protocol	88 // offsetof(efi_boot_services_32_t, handle_protocol)
-#define LI32_image_base		32 // offsetof(efi_loaded_image_32_t, image_base)
-
-	.text
-	.code32
-SYM_FUNC_START(efi32_pe_entry)
-/*
- * efi_status_t efi32_pe_entry(efi_handle_t image_handle,
- *			       efi_system_table_32_t *sys_table)
- */
-
-	pushl	%ebp
-	movl	%esp, %ebp
-	pushl	%eax				// dummy push to allocate loaded_image
-
-	pushl	%ebx				// save callee-save registers
-	pushl	%edi
-
-	call	verify_cpu			// check for long mode support
-	testl	%eax, %eax
-	movl	$0x80000003, %eax		// EFI_UNSUPPORTED
-	jnz	2f
-
-	call	1f
-1:	pop	%ebx
-
-	/* Get the loaded image protocol pointer from the image handle */
-	leal	-4(%ebp), %eax
-	pushl	%eax				// &loaded_image
-	leal	(loaded_image_proto - 1b)(%ebx), %eax
-	pushl	%eax				// pass the GUID address
-	pushl	8(%ebp)				// pass the image handle
-
-	/*
-	 * Note the alignment of the stack frame.
-	 *   sys_table
-	 *   handle             <-- 16-byte aligned on entry by ABI
-	 *   return address
-	 *   frame pointer
-	 *   loaded_image       <-- local variable
-	 *   saved %ebx		<-- 16-byte aligned here
-	 *   saved %edi
-	 *   &loaded_image
-	 *   &loaded_image_proto
-	 *   handle             <-- 16-byte aligned for call to handle_protocol
-	 */
-
-	movl	12(%ebp), %eax			// sys_table
-	movl	ST32_boottime(%eax), %eax	// sys_table->boottime
-	call	*BS32_handle_protocol(%eax)	// sys_table->boottime->handle_protocol
-	addl	$12, %esp			// restore argument space
-	testl	%eax, %eax
-	jnz	2f
-
-	movl	8(%ebp), %ecx			// image_handle
-	movl	12(%ebp), %edx			// sys_table
-	movl	-4(%ebp), %esi			// loaded_image
-	movl	LI32_image_base(%esi), %esi	// loaded_image->image_base
-	leal	(startup_32 - 1b)(%ebx), %ebp	// runtime address of startup_32
-	/*
-	 * We need to set the image_offset variable here since startup_32() will
-	 * use it before we get to the 64-bit efi_pe_entry() in C code.
-	 */
-	subl	%esi, %ebp			// calculate image_offset
-	movl	%ebp, (image_offset - 1b)(%ebx)	// save image_offset
-	xorl	%esi, %esi
-	jmp	efi32_entry			// pass %ecx, %edx, %esi
-						// no other registers remain live
-
-2:	popl	%edi				// restore callee-save registers
-	popl	%ebx
-	leave
-	RET
-SYM_FUNC_END(efi32_pe_entry)
-
-	.section ".rodata"
-	/* EFI loaded image protocol GUID */
-	.balign 4
-SYM_DATA_START_LOCAL(loaded_image_proto)
-	.long	0x5b1b31a1
-	.word	0x9562, 0x11d2
-	.byte	0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b
-SYM_DATA_END(loaded_image_proto)
-#endif
 
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 	__HEAD