[PATCH V2 6/6] dmaengine: xilinx_dma: Program interrupt delay timeout
From: Sarath Babu Naidu Gaddam
Date: Thu Nov 24 2022 - 05:29:56 EST
From: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
Program IRQDelay for AXI DMA. The interrupt timeout mechanism causes
the DMA engine to generate an interrupt after the delay time period
has expired. It enables dmaengine to respond in real-time even though
interrupt coalescing is configured. It also remove the placeholder
for delay interrupt and merge it with frame completion interrupt.
Since by default interrupt delay timeout is disabled this feature
addition has no functional impact on VDMA and CDMA IP's.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xxxxxxxxxx>
Signed-off-by: Sarath Babu Naidu Gaddam <sarath.babu.naidu.gaddam@xxxxxxx>
---
drivers/dma/xilinx/xilinx_dma.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index ce0c151d8f61..333d68ee3559 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -173,8 +173,10 @@
#define XILINX_DMA_MAX_TRANS_LEN_MAX 23
#define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
#define XILINX_DMA_CR_COALESCE_MAX GENMASK(23, 16)
+#define XILINX_DMA_CR_DELAY_MAX GENMASK(31, 24)
#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
#define XILINX_DMA_CR_COALESCE_SHIFT 16
+#define XILINX_DMA_CR_DELAY_SHIFT 24
#define XILINX_DMA_BD_SOP BIT(27)
#define XILINX_DMA_BD_EOP BIT(26)
#define XILINX_DMA_COALESCE_MAX 255
@@ -410,6 +412,7 @@ struct xilinx_dma_tx_descriptor {
* @stop_transfer: Differentiate b/w DMA IP's quiesce
* @tdest: TDEST value for mcdma
* @has_vflip: S2MM vertical flip
+ * @irq_delay: Interrupt delay timeout
*/
struct xilinx_dma_chan {
struct xilinx_dma_device *xdev;
@@ -448,6 +451,7 @@ struct xilinx_dma_chan {
int (*stop_transfer)(struct xilinx_dma_chan *chan);
u16 tdest;
bool has_vflip;
+ u8 irq_delay;
};
/**
@@ -1560,6 +1564,9 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->has_sg)
xilinx_write(chan, XILINX_DMA_REG_CURDESC,
head_desc->async_tx.phys);
+ reg &= ~XILINX_DMA_CR_DELAY_MAX;
+ reg |= chan->irq_delay << XILINX_DMA_CR_DELAY_SHIFT;
+ dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
xilinx_dma_start(chan);
@@ -1887,15 +1894,8 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
}
}
- if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
- /*
- * Device takes too long to do the transfer when user requires
- * responsiveness.
- */
- dev_dbg(chan->dev, "Inter-packet latency too long\n");
- }
-
- if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
+ if (status & (XILINX_DMA_DMASR_FRM_CNT_IRQ |
+ XILINX_DMA_DMASR_DLY_CNT_IRQ)) {
spin_lock(&chan->lock);
xilinx_dma_complete_descriptor(chan);
chan->idle = true;
@@ -2822,6 +2822,8 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
/* Retrieve the channel properties from the device tree */
has_dre = of_property_read_bool(node, "xlnx,include-dre");
+ of_property_read_u8(node, "xlnx,irq-delay", &chan->irq_delay);
+
chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
err = of_property_read_u32(node, "xlnx,datawidth", &value);
--
2.25.1