On 11/24/2022 3:34 PM, Quan, Evan wrote:
[AMD Official Use Only - General]
Could the attached patch help?
Evan
-----Original Message-----
From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of ???
Sent: Friday, November 18, 2022 5:25 PM
To: Michel Dänzer <michel.daenzer@xxxxxxxxxxx>; Koenig, Christian
<Christian.Koenig@xxxxxxx>; Deucher, Alexander
<Alexander.Deucher@xxxxxxx>
Cc: amd-gfx@xxxxxxxxxxxxxxxxxxxxx; Pan, Xinhui <Xinhui.Pan@xxxxxxx>;
linux-kernel@xxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx
Subject: Re: [PATCH] drm/amdgpu: add mb for si
在 2022/11/18 17:18, Michel Dänzer 写道:
On 11/18/22 09:01, Christian König wrote:
Am 18.11.22 um 08:48 schrieb Zhenneng Li:
During reboot test on arm64 platform, it may failure on boot, so add
this mb in smc.
The error message are as follows:
[ 6.996395][ 7] [ T295] [drm:amdgpu_device_ip_late_init
[amdgpu]] *ERROR*
late_init of IP block <si_dpm> failed -22 [
7.006919][ 7] [ T295] amdgpu 0000:04:00.0:
The issue is happening in late_init() which eventually does
ret = si_thermal_enable_alert(adev, false);
Just before this, si_thermal_start_thermal_controller is called in hw_init and that enables thermal alert.
Maybe the issue is with enable/disable of thermal alerts in quick succession. Adding a delay inside si_thermal_start_thermal_controller might help.
Thanks,
Lijo
need to give a detailed explanation why this is necessary.amdgpu_device_ip_late_init failed [ 7.014224][ 7] [ T295] amdgpuMemory barries are not supposed to be sprinkled around like this, you
0000:04:00.0: Fatal error during GPU init
affect the values of rst & clk.In particular, it makes no sense in this specific place, since it cannot directly
Regards,
Christian.
Signed-off-by: Zhenneng Li <lizhenneng@xxxxxxxxxx>
---
drivers/gpu/drm/amd/pm/legacy-dpm/si_smc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/pm/legacy-dpm/si_smc.c
b/drivers/gpu/drm/amd/pm/legacy-dpm/si_smc.c
index 8f994ffa9cd1..c7656f22278d 100644
--- a/drivers/gpu/drm/amd/pm/legacy-dpm/si_smc.c
+++ b/drivers/gpu/drm/amd/pm/legacy-dpm/si_smc.c
@@ -155,6 +155,8 @@ bool amdgpu_si_is_smc_running(struct
amdgpu_device *adev)
u32 rst = RREG32_SMC(SMC_SYSCON_RESET_CNTL);
u32 clk = RREG32_SMC(SMC_SYSCON_CLOCK_CNTL_0);
+ mb();
+
if (!(rst & RST_REG) && !(clk & CK_DISABLE))
return true;
I thinks so too.
But when I do reboot test using nine desktop machines, there maybe report
this error on one or two machines after Hundreds of times or Thousands of
times reboot test, at the beginning, I use msleep() instead of mb(), these
two methods are all works, but I don't know what is the root case.
I use this method on other verdor's oland card, this error message are
reported again.
What could be the root reason?
test environmen:
graphics card: OLAND 0x1002:0x6611 0x1642:0x1869 0x87
driver: amdgpu
os: ubuntu 2004
platform: arm64
kernel: 5.4.18