Re: [PATCH v1 2/2] ALSA: hda: cs35l41: Use ACPI_COMPANION to read acpi properties

From: Hans de Goede
Date: Thu Nov 24 2022 - 07:08:13 EST

Next message: Kemeng Shi: "Re: [PATCH 04/11] blk-throttle: correct calculation of wait time in tg_may_dispatch"
Previous message: Krzysztof Kozlowski: "Re: [PATCH v2 2/3] dt-bindings: interconnect: Add Qualcomm SM8550"
In reply to: Andy Shevchenko: "Re: [PATCH v1 2/2] ALSA: hda: cs35l41: Use ACPI_COMPANION to read acpi properties"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On 11/24/22 12:07, Stefan Binding wrote:
> Currently the driver finds the acpi_device used to read certain
> properties using the HID, however, this is not necessary, as the
> acpi_device can be obtained from the device itself.
>
> With the ACPI_COMPANION correctly set, we can also simplify how
> we obtain the reset gpio.

Typically when you write "also do ..." in a commit message
that is a hint to yourself that it might be better to split
the commit into 2 commits which each do only 1 thing, for easier
review. But e.g. also to easier see what is going on if a bisect
points out the commit as being the first bad one.

So once the issues with patch 1/2 are resolved, please consider
splitting this patch into 2 smaller patches.

Regards,

Hans

>
> Signed-off-by: Stefan Binding <sbinding@xxxxxxxxxxxxxxxxxxxxx>
> ---
> sound/pci/hda/cs35l41_hda.c | 50 ++++++++++++++++---------------------
> 1 file changed, 21 insertions(+), 29 deletions(-)
>
> diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
> index e5f0549bf06d..50cbbcce4946 100644
> --- a/sound/pci/hda/cs35l41_hda.c
> +++ b/sound/pci/hda/cs35l41_hda.c
> @@ -1214,16 +1214,15 @@ static int cs35l41_get_speaker_id(struct device *dev, int amp_index,
> * And devm functions expect that the device requesting the resource has the correct
> * fwnode.
> */
> -static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, struct device *physdev, int id,
> - const char *hid)
> +static int cs35l41_no_acpi_dsd(struct cs35l41_hda *cs35l41, int id, const char *hid)
> {
> struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
>
> /* check I2C address to assign the index */
> cs35l41->index = id == 0x40 ? 0 : 1;
> cs35l41->channel_index = 0;
> - cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
> - cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
> + cs35l41->reset_gpio = gpiod_get_index(cs35l41->dev, NULL, 0, GPIOD_OUT_HIGH);
> + cs35l41->speaker_id = cs35l41_get_speaker_id(cs35l41->dev, 0, 0, 2);
> hw_cfg->spk_pos = cs35l41->index;
> hw_cfg->gpio2.func = CS35L41_INTERRUPT;
> hw_cfg->gpio2.valid = true;
> @@ -1255,39 +1254,36 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
> struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
> u32 values[HDA_MAX_COMPONENTS];
> struct acpi_device *adev;
> - struct device *physdev;
> +
> const char *sub;
> char *property;
> size_t nval;
> int i, ret;
>
> - adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
> + adev = ACPI_COMPANION(cs35l41->dev);
> if (!adev) {
> - dev_err(cs35l41->dev, "Failed to find an ACPI device for %s\n", hid);
> + dev_err(cs35l41->dev, "Failed to find an ACPI device for %s\n",
> + dev_name(cs35l41->dev));
> return -ENODEV;
> }
>
> - physdev = get_device(acpi_get_first_physical_node(adev));
> - acpi_dev_put(adev);
> -
> - sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev));
> + sub = acpi_get_subsystem_id(ACPI_HANDLE(cs35l41->dev));
> if (IS_ERR(sub))
> sub = NULL;
> cs35l41->acpi_subsystem_id = sub;
>
> property = "cirrus,dev-index";
> - ret = device_property_count_u32(physdev, property);
> - if (ret <= 0) {
> - ret = cs35l41_no_acpi_dsd(cs35l41, physdev, id, hid);
> - goto err_put_physdev;
> - }
> + ret = device_property_count_u32(cs35l41->dev, property);
> + if (ret <= 0)
> + return cs35l41_no_acpi_dsd(cs35l41, id, hid);
> +
> if (ret > ARRAY_SIZE(values)) {
> ret = -EINVAL;
> goto err;
> }
> nval = ret;
>
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret)
> goto err;
>
> @@ -1307,11 +1303,10 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
> /* To use the same release code for all laptop variants we can't use devm_ version of
> * gpiod_get here, as CLSA010* don't have a fully functional bios with an _DSD node
> */
> - cs35l41->reset_gpio = fwnode_gpiod_get_index(acpi_fwnode_handle(adev), "reset", cs35l41->index,
> - GPIOD_OUT_LOW, "cs35l41-reset");
> + cs35l41->reset_gpio = gpiod_get_index(cs35l41->dev, "reset", cs35l41->index, GPIOD_OUT_LOW);
>
> property = "cirrus,speaker-position";
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret)
> goto err;
> hw_cfg->spk_pos = values[cs35l41->index];
> @@ -1322,41 +1317,41 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
> cs35l41->channel_index++;
>
> property = "cirrus,gpio1-func";
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret)
> goto err;
> hw_cfg->gpio1.func = values[cs35l41->index];
> hw_cfg->gpio1.valid = true;
>
> property = "cirrus,gpio2-func";
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret)
> goto err;
> hw_cfg->gpio2.func = values[cs35l41->index];
> hw_cfg->gpio2.valid = true;
>
> property = "cirrus,boost-peak-milliamp";
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret == 0)
> hw_cfg->bst_ipk = values[cs35l41->index];
> else
> hw_cfg->bst_ipk = -1;
>
> property = "cirrus,boost-ind-nanohenry";
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret == 0)
> hw_cfg->bst_ind = values[cs35l41->index];
> else
> hw_cfg->bst_ind = -1;
>
> property = "cirrus,boost-cap-microfarad";
> - ret = device_property_read_u32_array(physdev, property, values, nval);
> + ret = device_property_read_u32_array(cs35l41->dev, property, values, nval);
> if (ret == 0)
> hw_cfg->bst_cap = values[cs35l41->index];
> else
> hw_cfg->bst_cap = -1;
>
> - cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, cs35l41->index, nval, -1);
> + cs35l41->speaker_id = cs35l41_get_speaker_id(cs35l41->dev, cs35l41->index, nval, -1);
>
> if (hw_cfg->bst_ind > 0 || hw_cfg->bst_cap > 0 || hw_cfg->bst_ipk > 0)
> hw_cfg->bst_type = CS35L41_INT_BOOST;
> @@ -1364,14 +1359,11 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
> hw_cfg->bst_type = CS35L41_EXT_BOOST;
>
> hw_cfg->valid = true;
> - put_device(physdev);
>
> return 0;
>
> err:
> dev_err(cs35l41->dev, "Failed property %s: %d\n", property, ret);
> -err_put_physdev:
> - put_device(physdev);
>
> return ret;
> }

Next message: Kemeng Shi: "Re: [PATCH 04/11] blk-throttle: correct calculation of wait time in tg_may_dispatch"
Previous message: Krzysztof Kozlowski: "Re: [PATCH v2 2/3] dt-bindings: interconnect: Add Qualcomm SM8550"
In reply to: Andy Shevchenko: "Re: [PATCH v1 2/2] ALSA: hda: cs35l41: Use ACPI_COMPANION to read acpi properties"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]