[PATCH RESEND 1/1] can: esd_usb: Allow REC and TEC to return to zero

[Frank Jungclaus]

We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0).
So when handling the "Back to Error Active"-event force
txerr = rxerr = 0, otherwise the berr-counters might stay on
values like 95 forever ...

Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.

Signed-off-by: Frank Jungclaus <frank.jungclaus@xxxxxx>
---
 drivers/net/can/usb/esd_usb.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
index 1bcfad11b1e4..da24c649aadd 100644
--- a/drivers/net/can/usb/esd_usb.c
+++ b/drivers/net/can/usb/esd_usb.c
@@ -230,10 +230,14 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 
 	if (id == ESD_EV_CAN_ERROR_EXT) {
 		u8 state = msg->msg.rx.data[0];
-		u8 ecc = msg->msg.rx.data[1];
+		u8 ecc   = msg->msg.rx.data[1];
 		u8 rxerr = msg->msg.rx.data[2];
 		u8 txerr = msg->msg.rx.data[3];
 
+		netdev_dbg(priv->netdev,
+			   "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
+			   msg->msg.rx.dlc, state, ecc, rxerr, txerr);
+
 		skb = alloc_can_err_skb(priv->netdev, &cf);
 		if (skb == NULL) {
 			stats->rx_dropped++;
@@ -260,6 +264,8 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
 				break;
 			default:
 				priv->can.state = CAN_STATE_ERROR_ACTIVE;
+				txerr = 0;
+				rxerr = 0;
 				break;
 			}
 		} else {
-- 
2.25.1