Re: [PATCH] drm/msm/dpu: Print interrupt index in addition to the mask

[Abhinav Kumar]

On 11/21/2022 2:24 PM, Marijn Suijten wrote:
> The mask only describes the `irq_idx % 32` part, making it generally
> impossible to deduce what interrupt is being enabled/disabled.  Since
> `debug/core_irq` in debugfs (and other prints) also include the full
> `DPU_IRQ_IDX()` value, print the same full value here for easier
> correlation instead of only adding the `irq_idx / 32` part.
>
> Furthermore, make the dbgstr messages more consistent.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index cf1b6d84c18a..64589a9c2c51 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -252,9 +252,9 @@ static int dpu_hw_intr_enable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
>   
>   	cache_irq_mask = intr->cache_irq_mask[reg_idx];
>   	if (cache_irq_mask & DPU_IRQ_MASK(irq_idx)) {
> -		dbgstr = "DPU IRQ already set:";
> +		dbgstr = "already ";
>   	} else {
> -		dbgstr = "DPU IRQ enabled:";
> +		dbgstr = "";
>   
>   		cache_irq_mask |= DPU_IRQ_MASK(irq_idx);
>   		/* Cleaning any pending interrupt */
> @@ -268,7 +268,7 @@ static int dpu_hw_intr_enable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
>   		intr->cache_irq_mask[reg_idx] = cache_irq_mask;
>   	}
>   
> -	pr_debug("%s MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", dbgstr,
> +	pr_debug("DPU IRQ %d %senabled: MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", irq_idx, dbgstr,
>   			DPU_IRQ_MASK(irq_idx), cache_irq_mask);
>   
>   	return 0;
> @@ -301,9 +301,9 @@ static int dpu_hw_intr_disable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
>   
>   	cache_irq_mask = intr->cache_irq_mask[reg_idx];
>   	if ((cache_irq_mask & DPU_IRQ_MASK(irq_idx)) == 0) {
> -		dbgstr = "DPU IRQ is already cleared:";
> +		dbgstr = "already ";
>   	} else {
> -		dbgstr = "DPU IRQ mask disable:";
> +		dbgstr = "";
>   
>   		cache_irq_mask &= ~DPU_IRQ_MASK(irq_idx);
>   		/* Disable interrupts based on the new mask */
> @@ -317,7 +317,7 @@ static int dpu_hw_intr_disable_irq_locked(struct dpu_hw_intr *intr, int irq_idx)
>   		intr->cache_irq_mask[reg_idx] = cache_irq_mask;
>   	}
>   
> -	pr_debug("%s MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", dbgstr,
> +	pr_debug("DPU IRQ %d %sdisabled: MASK:0x%.8lx, CACHE-MASK:0x%.8x\n", irq_idx, dbgstr,
>   			DPU_IRQ_MASK(irq_idx), cache_irq_mask);
>   
>   	return 0;