Re: [PATCH] arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake up

[Neil Armstrong]

On 24/11/2022 23:01, Konrad Dybcio wrote:
> The hardware turns out to be pretty sluggish at assuming it can only
> do USB2 with just a USB2 phy assigned to it - before it needed about
> 6 minutes to acknowledge that.
>
> Limit it to USB-HS explicitly to make USB come up about 720x faster.
>
> Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> No words.
>
>   arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 5 +----
>   1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> index 12a7b6d91dbe..0ab9687f3406 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
> @@ -991,10 +991,6 @@ touch_int_sleep: touch-int-sleep-state {
>   	};
>   };
>   
> -/*
> - * For reasons that are currently unknown (but probably related to fusb301), USB takes about
> - * 6 minutes to wake up (nothing interesting in kernel logs), but then it works as it should.
> - */
>   &usb3 {
>   	status = "okay";
>   	qcom,select-utmi-as-pipe-clk;
> @@ -1003,6 +999,7 @@ &usb3 {
>   &usb3_dwc3 {
>   	extcon = <&usb3_id>;
>   	dr_mode = "peripheral";
> +	maximum-speed = "high-speed";
>   	phys = <&hsusb_phy1>;
>   	phy-names = "usb2-phy";
>   	snps,hird-threshold = /bits/ 8 <0>;


Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>