Re: [PATCH] USB: serial: option: add Quectel EM05-G modem

[Johan Hovold]

On Sat, Nov 19, 2022 at 05:44:47PM +0800, Duke Xin wrote:
> The EM05-G modem has 2 USB configurations that are configurable via the AT
> command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
> the following interfaces, respectively:
> 
> "RMNET" : AT + DIAG + NMEA + Modem + QMI
> "MBIM"  : MBIM + AT + DIAG + NMEA + Modem
> 
> The detailed description of the USB configuration for each mode as follows:

...

> Signed-off-by: Duke Xin <duke_xinanwen@xxxxxxx>
> ---

This looks much better, thanks!

In the future, when updating a patch you should include a changelog here
below the '---' line and the patch revision should be indicated in the
Subject prefix (e.g. this should have been "[PATCH v3]: USB: serial:
...").

>  drivers/usb/serial/option.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index c3b7f1d98e78..fc14df5033d8 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -254,6 +254,7 @@ static void option_instat_callback(struct urb *urb);
>  #define QUECTEL_PRODUCT_BG96			0x0296
>  #define QUECTEL_PRODUCT_EP06			0x0306
>  #define QUECTEL_PRODUCT_EM05G			0x030a
> +#define QUECTEL_PRODUCT_EM05G_SG		0x0311

These defines should be sorted by PID.

>  #define QUECTEL_PRODUCT_EM060K			0x030b
>  #define QUECTEL_PRODUCT_EM12			0x0512
>  #define QUECTEL_PRODUCT_RM500Q			0x0800
> @@ -1160,6 +1161,8 @@ static const struct usb_device_id option_ids[] = {
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
>  	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
>  	  .driver_info = RSVD(6) | ZLP },
> +	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
> +	  .driver_info = RSVD(6) | ZLP },  

And you have some stray whitespace after the comma here, which would
have been picked up by scripts/checkpatch.pl which you should run on
your patches before submitting them.

>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x30) },
>  	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0xff, 0x40) },

I've fixed up the above nits (sort order and white space) and applied
this one for 6.2 now so you don't need to send a v4 this time.

Johan