Re: [RFC PATCH v2 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
From: Johan Hovold
Date: Fri Nov 25 2022 - 04:54:27 EST
On Fri, Nov 25, 2022 at 10:27:47AM +0100, Luca Weiss wrote:
> Add the compatible describing the combo phy found on SM6350.
>
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
> @Johan Hovold, I've sent this v2 as RFC because there are several things
> where I have questions on how it should be done.
>
> In this patch, you can see there's cfg_ahb (&xo_board) and power-domains
> is not set. In msm-4.19 &gcc_usb30_prim_gdsc is only used in the
> ssusb@a600000 node, or should I also add it to qmpphy?
Yeah, you may need to add a platform specific section of the clocks,
which appear to be different, even if I'm not sure they are currently
described correctly (xo_board as cfg_ahb and "QLINK" as ref). How are
they named in the vendor's dts?
It should be OK to include the power-domain also for the PHY node.
> .../bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
> index 6f31693d9868..3e39e3e0504d 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
> @@ -17,16 +17,18 @@ properties:
> compatible:
> enum:
> - qcom,sc8280xp-qmp-usb43dp-phy
> + - qcom,sm6350-qmp-usb3-dp-phy
>
> reg:
> maxItems: 1
>
> clocks:
> - maxItems: 4
> + maxItems: 5
>
> clock-names:
> items:
> - const: aux
> + - const: cfg_ahb
> - const: ref
> - const: com_aux
> - const: usb3_pipe
So this would need to be moved to an allOf: construct at the end with
one section each for sc8280xp and sm6350.
> @@ -61,7 +63,6 @@ required:
> - reg
> - clocks
> - clock-names
> - - power-domains
> - resets
> - reset-names
> - vdda-phy-supply
Johan