Re: [PATCH 2/2] ARM: dts: qcom: align LED node names with dtschema
From: Konrad Dybcio
Date: Fri Nov 25 2022 - 09:55:55 EST
On 25.11.2022 15:42, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern:
>
> qcom-ipq4018-ap120c-ac.dtb: leds: 'wlan2g', 'wlan5g' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts | 6 +++---
> arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts | 6 +++---
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
> index cf7da1ab177c..1b27edce9d4f 100644
> --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
> +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
> @@ -9,7 +9,7 @@ / {
> leds {
> compatible = "gpio-leds";
>
> - power {
> + led-power {
> label = "ap120c-ac:green:power";
> function = LED_FUNCTION_POWER;
> color = <LED_COLOR_ID_GREEN>;
> @@ -17,14 +17,14 @@ power {
> default-state = "on";
> };
>
> - wlan {
> + led-wlan {
> label = "ap120c-ac:green:wlan";
> function = LED_FUNCTION_WLAN;
> color = <LED_COLOR_ID_GREEN>;
> gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
> };
>
> - support {
> + led-support {
> label = "ap120c-ac:green:support";
> color = <LED_COLOR_ID_GREEN>;
> gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
> index c4f89b712fd9..a707057c887d 100644
> --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
> +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
> @@ -7,7 +7,7 @@ / {
> leds {
> compatible = "gpio-leds";
>
> - status: status {
> + status: led-status {
> label = "ap120c-ac:blue:status";
> function = LED_FUNCTION_STATUS;
> color = <LED_COLOR_ID_BLUE>;
> @@ -15,7 +15,7 @@ status: status {
> default-state = "keep";
> };
>
> - wlan2g {
> + led-wlan2g {
> label = "ap120c-ac:green:wlan2g";
> function = LED_FUNCTION_WLAN;
> color = <LED_COLOR_ID_GREEN>;
> @@ -23,7 +23,7 @@ wlan2g {
> linux,default-trigger = "phy0tpt";
> };
>
> - wlan5g {
> + led-wlan5g {
> label = "ap120c-ac:red:wlan5g";
> function = LED_FUNCTION_WLAN;
> color = <LED_COLOR_ID_RED>;