[PATCH v2 1/2] ARM: dts: omap: align LED node names with dtschema

From: Krzysztof Kozlowski
Date: Sun Nov 27 2022 - 15:30:52 EST

Next message: Florian Fainelli: "Re: [v2][PATCH 1/1] net: phy: Add link between phy dev and mac dev"
Previous message: Krzysztof Kozlowski: "[PATCH v2 2/2] ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED"
Next in thread: Krzysztof Kozlowski: "[PATCH v2 2/2] ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The node names should be generic and DT schema expects certain pattern:

omap3-beagle-ab4.dtb: leds: 'heartbeat', 'mmc', 'pmu_stat' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes since v1:
1. None
---
arch/arm/boot/dts/omap3-beagle.dts | 6 +++---
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-n900.dts | 2 +-
arch/arm/boot/dts/omap3-overo-alto35-common.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-overo-palo35-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-overo-palo43-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-overo-summit-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-tobi-common.dtsi | 2 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 4 ++--
arch/arm/boot/dts/omap4-panda-es.dts | 4 ++--
12 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 0548b391334f..47ff1ffddfc5 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -28,18 +28,18 @@ aliases {

leds {
compatible = "gpio-leds";
- pmu_stat {
+ led-pmu-stat {
label = "beagleboard::pmu_stat";
gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
};

- heartbeat {
+ led-heartbeat {
label = "beagleboard::usr0";
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
linux,default-trigger = "heartbeat";
};

- mmc {
+ led-mmc {
label = "beagleboard::usr1";
gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 54cd37336be7..38aa1febc33f 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -15,28 +15,28 @@ memory@80000000 {
leds {
compatible = "gpio-leds";

- heartbeat {
+ led-heartbeat {
label = "devkit8000::led1";
gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
default-state = "on";
linux,default-trigger = "heartbeat";
};

- mmc {
+ led-mmc {
label = "devkit8000::led2";
gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
default-state = "on";
linux,default-trigger = "none";
};

- usr {
+ led-usr {
label = "devkit8000::led3";
gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
default-state = "on";
linux,default-trigger = "usr";
};

- pmu_stat {
+ led-pmu-stat {
label = "devkit8000::pmu_stat";
gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 98a67581bdd2..ba35cff5b01e 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -49,7 +49,7 @@ cpu@0 {

leds {
compatible = "gpio-leds";
- heartbeat {
+ led-heartbeat {
label = "debug::sleep";
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
linux,default-trigger = "default-on";
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index bb932913c9e3..a6dbbba799b2 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -17,19 +17,19 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- gpio148 {
+ led-gpio148 {
label = "overo:red:gpio148";
gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>; /* gpio 148 */
};
- gpio150 {
+ led-gpio150 {
label = "overo:yellow:gpio150";
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio 150 */
};
- gpio151 {
+ led-gpio151 {
label = "overo:blue:gpio151";
gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* gpio 151 */
};
- gpio170 {
+ led-gpio170 {
label = "overo:green:gpio170";
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* gpio 170 */
};
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 2d2c61d7aa86..0d0e62c00916 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -17,12 +17,12 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- heartbeat {
+ led-heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
linux,default-trigger = "heartbeat";
};
- gpio22 {
+ led-gpio22 {
label = "overo:blue:gpio22";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 155aec121400..5f6721326f86 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -17,12 +17,12 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- heartbeat {
+ led-heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
linux,default-trigger = "heartbeat";
};
- gpio22 {
+ led-gpio22 {
label = "overo:blue:gpio22";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 82a04466747a..4b66f622ac13 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -17,12 +17,12 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- heartbeat {
+ led-heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
linux,default-trigger = "heartbeat";
};
- gpio22 {
+ led-gpio22 {
label = "overo:blue:gpio22";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 453a55324fa1..a8f163a899f0 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -17,12 +17,12 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- heartbeat {
+ led-heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
linux,default-trigger = "heartbeat";
};
- gpio22 {
+ led-gpio22 {
label = "overo:blue:gpio22";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
};
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
index df7450f17ffd..ec03ca17e98b 100644
--- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -15,7 +15,7 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
- heartbeat {
+ led-heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9bf4b88a4b50..5432e4e16ab5 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -13,7 +13,7 @@
/ {
leds {
compatible = "gpio-leds";
- heartbeat {
+ led-heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 518652a599bd..0269424350aa 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -49,13 +49,13 @@ leds: leds {
&led_wkgpio_pins
>;

- heartbeat {
+ led-heartbeat {
label = "pandaboard::status1";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};

- mmc {
+ led-mmc {
label = "pandaboard::status2";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 7c6886cd738f..7631029e4d7a 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -79,10 +79,10 @@ &led_gpio_pins
&led_wkgpio_pins
>;

- heartbeat {
+ led-heartbeat {
gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
};
- mmc {
+ led-mmc {
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
--
2.34.1

Next message: Florian Fainelli: "Re: [v2][PATCH 1/1] net: phy: Add link between phy dev and mac dev"
Previous message: Krzysztof Kozlowski: "[PATCH v2 2/2] ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED"
Next in thread: Krzysztof Kozlowski: "[PATCH v2 2/2] ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]