[PATCH v2 21/22] x86/hreset: Configure history reset

[Ricardo Neri]

Configure the MSR that controls the behavior of HRESET on each logical
processor.

Cc: Ben Segall <bsegall@xxxxxxxxxx>
Cc: Daniel Bristot de Oliveira <bristot@xxxxxxxxxx>
Cc: Dietmar Eggemann <dietmar.eggemann@xxxxxxx>
Cc: Joel Fernandes (Google) <joel@xxxxxxxxxxxxxxxxx>
Cc: Len Brown <len.brown@xxxxxxxxx>
Cc: Mel Gorman <mgorman@xxxxxxx>
Cc: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Cc: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Cc: Steven Rostedt <rostedt@xxxxxxxxxxx>
Cc: Tim C. Chen <tim.c.chen@xxxxxxxxx>
Cc: Valentin Schneider <vschneid@xxxxxxxxxx>
Cc: x86@xxxxxxxxxx
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx>
---
Changes since v1:
 * Marked hardware_history_features as __ro_after_init instead of
   __read_mostly. (PeterZ)
---
 arch/x86/kernel/cpu/common.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 73cc546e024d..f8630da2a6dd 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -412,6 +412,26 @@ static __always_inline void setup_umip(struct cpuinfo_x86 *c)
 	cr4_clear_bits(X86_CR4_UMIP);
 }
 
+static u32 hardware_history_features __ro_after_init;
+
+static __always_inline void setup_hreset(struct cpuinfo_x86 *c)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_HRESET))
+		return;
+
+	/*
+	 * Use on all CPUs the hardware history features that the boot
+	 * CPU supports.
+	 */
+	if (c == &boot_cpu_data)
+		hardware_history_features = cpuid_ebx(0x20);
+
+	if (!hardware_history_features)
+		return;
+
+	wrmsrl(MSR_IA32_HW_HRESET_ENABLE, hardware_history_features);
+}
+
 /* These bits should not change their value after CPU init is finished. */
 static const unsigned long cr4_pinned_mask =
 	X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP |
@@ -1844,10 +1864,11 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	/* Disable the PN if appropriate */
 	squash_the_stupid_serial_number(c);
 
-	/* Set up SMEP/SMAP/UMIP */
+	/* Set up SMEP/SMAP/UMIP/HRESET */
 	setup_smep(c);
 	setup_smap(c);
 	setup_umip(c);
+	setup_hreset(c);
 
 	/* Enable FSGSBASE instructions if available. */
 	if (cpu_has(c, X86_FEATURE_FSGSBASE)) {
-- 
2.25.1