[PATCH V4 5/7] riscv: ftrace: Make ftrace_caller call ftrace_graph_func

[guoren]

From: Song Shuai <suagrfillet@xxxxxxxxx>

In order to make the function graph use ftrace directly, ftrace_caller
should be adjusted to save the necessary regs against the pt_regs layout
so it can call ftrace_graph_func reasonably.

SAVE_ALL now saves all the regs according to the pt_regs struct. Here
supersedes SAVE_ALL by SAVE_ABI_REGS which has an extra option to allow
saving only the necessary ABI-related regs for ftrace_caller.

ftrace_caller and ftrace_regs_caller save their regs with the respective
option of SAVE_ABI_REGS, then call the tracing function, especially
graph_ops's ftrace_graph_func. So the ftrace_graph_[regs]_call labels
aren't needed anymore if FTRACE_WITH_REGS is defined.

As the previous patch described, the ftrace_caller remains with its
ftrace_graph_call if FTRACE_WITH_REGS isn't defined,

For convenience, the original argument setup for the tracing function in
ftrace_[regs]_caller is separated as PREPARE_ARGS.

Signed-off-by: Song Shuai <suagrfillet@xxxxxxxxx>
Tested-by: Guo Ren <guoren@xxxxxxxxxx>
Signed-off-by: Guo Ren <guoren@xxxxxxxxxx>
---
 arch/riscv/kernel/mcount-dyn.S | 142 ++++++++++++++++++++++++---------
 1 file changed, 104 insertions(+), 38 deletions(-)

diff --git a/arch/riscv/kernel/mcount-dyn.S b/arch/riscv/kernel/mcount-dyn.S
index 64bc79816f5e..466c6ef217b1 100644
--- a/arch/riscv/kernel/mcount-dyn.S
+++ b/arch/riscv/kernel/mcount-dyn.S
@@ -57,19 +57,52 @@
 	.endm
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	.macro SAVE_ALL
+
+/**
+* SAVE_ABI_REGS - save regs against the pt_regs struct
+*
+* @all: tell if saving all the regs
+*
+* If all is set, all the regs will be saved, otherwise only ABI
+* related regs (a0-a7,epc,ra and optional s0) will be saved.
+*
+* After the stack is established,
+*
+* 0(sp) stores the PC of the traced function which can be accessed
+* by &(fregs)->regs->epc in tracing function. Note that the real
+* function entry address should be computed with -FENTRY_RA_OFFSET.
+*
+* 8(sp) stores the function return address (i.e. parent IP) that
+* can be accessed by &(fregs)->regs->ra in tracing function.
+*
+* The other regs are saved at the respective localtion and accessed
+* by the respective pt_regs member.
+*
+* Here is the layout of stack for your reference.
+*
+* PT_SIZE_ON_STACK  ->  +++++++++
+*                       + ..... +
+*                       + t3-t6 +
+*                       + s2-s11+
+*                       + a0-a7 + --++++-> ftrace_caller saved
+*                       + s1    +   +
+*                       + s0    + --+
+*                       + t0-t2 +   +
+*                       + tp    +   +
+*                       + gp    +   +
+*                       + sp    +   +
+*                       + ra    + --+ // parent IP
+*               sp  ->  + epc   + --+ // PC
+*                       +++++++++
+**/
+	.macro SAVE_ABI_REGS, all=0
 	addi	sp, sp, -PT_SIZE_ON_STACK
 
 	REG_S t0,  PT_EPC(sp)
 	REG_S x1,  PT_RA(sp)
-	REG_S x2,  PT_SP(sp)
-	REG_S x3,  PT_GP(sp)
-	REG_S x4,  PT_TP(sp)
-	REG_S x5,  PT_T0(sp)
-	REG_S x6,  PT_T1(sp)
-	REG_S x7,  PT_T2(sp)
-	REG_S x8,  PT_S0(sp)
-	REG_S x9,  PT_S1(sp)
+
+	// always save the ABI regs
+
 	REG_S x10, PT_A0(sp)
 	REG_S x11, PT_A1(sp)
 	REG_S x12, PT_A2(sp)
@@ -78,6 +111,18 @@
 	REG_S x15, PT_A5(sp)
 	REG_S x16, PT_A6(sp)
 	REG_S x17, PT_A7(sp)
+
+	// save the leftover regs
+
+	.if \all == 1
+	REG_S x2,  PT_SP(sp)
+	REG_S x3,  PT_GP(sp)
+	REG_S x4,  PT_TP(sp)
+	REG_S x5,  PT_T0(sp)
+	REG_S x6,  PT_T1(sp)
+	REG_S x7,  PT_T2(sp)
+	REG_S x8,  PT_S0(sp)
+	REG_S x9,  PT_S1(sp)
 	REG_S x18, PT_S2(sp)
 	REG_S x19, PT_S3(sp)
 	REG_S x20, PT_S4(sp)
@@ -92,19 +137,19 @@
 	REG_S x29, PT_T4(sp)
 	REG_S x30, PT_T5(sp)
 	REG_S x31, PT_T6(sp)
+
+	// save s0 if FP_TEST defined
+
+	.else
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	REG_S x8,  PT_S0(sp)
+#endif
+	.endif
 	.endm
 
-	.macro RESTORE_ALL
+	.macro RESTORE_ABI_REGS, all=0
 	REG_L t0,  PT_EPC(sp)
 	REG_L x1,  PT_RA(sp)
-	REG_L x2,  PT_SP(sp)
-	REG_L x3,  PT_GP(sp)
-	REG_L x4,  PT_TP(sp)
-	REG_L x5,  PT_T0(sp)
-	REG_L x6,  PT_T1(sp)
-	REG_L x7,  PT_T2(sp)
-	REG_L x8,  PT_S0(sp)
-	REG_L x9,  PT_S1(sp)
 	REG_L x10, PT_A0(sp)
 	REG_L x11, PT_A1(sp)
 	REG_L x12, PT_A2(sp)
@@ -113,6 +158,16 @@
 	REG_L x15, PT_A5(sp)
 	REG_L x16, PT_A6(sp)
 	REG_L x17, PT_A7(sp)
+
+	.if \all == 1
+	REG_L x2,  PT_SP(sp)
+	REG_L x3,  PT_GP(sp)
+	REG_L x4,  PT_TP(sp)
+	REG_L x5,  PT_T0(sp)
+	REG_L x6,  PT_T1(sp)
+	REG_L x7,  PT_T2(sp)
+	REG_L x8,  PT_S0(sp)
+	REG_L x9,  PT_S1(sp)
 	REG_L x18, PT_S2(sp)
 	REG_L x19, PT_S3(sp)
 	REG_L x20, PT_S4(sp)
@@ -128,10 +183,25 @@
 	REG_L x30, PT_T5(sp)
 	REG_L x31, PT_T6(sp)
 
+	.else
+#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
+	REG_L x8,  PT_S0(sp)
+#endif
+	.endif
 	addi	sp, sp, PT_SIZE_ON_STACK
 	.endm
+
+	.macro PREPARE_ARGS
+	addi	a0, t0, -FENTRY_RA_OFFSET	// ip
+	la	a1, function_trace_op
+	REG_L	a2, 0(a1)			// op
+	REG_L	a1, PT_RA(sp)			// parent_ip
+	mv	a3, sp				// fregs
+	.endm
+
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 
+#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 ENTRY(ftrace_caller)
 	SAVE_ABI
 
@@ -160,33 +230,29 @@ ftrace_graph_call:
 	jr t0
 ENDPROC(ftrace_caller)
 
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
 ENTRY(ftrace_regs_caller)
-	SAVE_ALL
-
-	addi	a0, t0, -FENTRY_RA_OFFSET
-	la	a1, function_trace_op
-	REG_L	a2, 0(a1)
-	REG_L	a1, PT_RA(sp)
-	mv	a3, sp
+	SAVE_ABI_REGS 1
+	PREPARE_ARGS
 
 ftrace_regs_call:
 	.global ftrace_regs_call
 	call	ftrace_stub
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	addi	a0, sp, PT_RA
-	REG_L	a1, PT_T0(sp)
-	addi	a1, a1, -FENTRY_RA_OFFSET
-#ifdef HAVE_FUNCTION_GRAPH_FP_TEST
-	mv	a2, s0
-#endif
-ftrace_graph_regs_call:
-	.global ftrace_graph_regs_call
-	call	ftrace_stub
-#endif
 
-	RESTORE_ALL
+	RESTORE_ABI_REGS 1
 	jr t0
 ENDPROC(ftrace_regs_caller)
+
+ENTRY(ftrace_caller)
+	SAVE_ABI_REGS 0
+	PREPARE_ARGS
+
+ftrace_call:
+	.global ftrace_call
+	call	ftrace_stub
+
+	RESTORE_ABI_REGS 0
+	jr t0
+ENDPROC(ftrace_caller)
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */
-- 
2.36.1