[PATCH] USB: serial: f81232: fix division by zero on line-speed change
From: Johan Hovold
Date: Tue Nov 29 2022 - 09:20:36 EST
The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.
Fixes: 268ddb5e9b62 ("USB: serial: f81232: add high baud rate support")
Cc: stable@xxxxxxxxxxxxxxx # 5.2
Cc: Ji-Ze Hong (Peter Hong) <hpeter@xxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/f81232.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 2dd58cd9f0cc..891fb1fe69df 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -130,9 +130,6 @@ static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ,
static int calc_baud_divisor(speed_t baudrate, speed_t clockrate)
{
- if (!baudrate)
- return 0;
-
return DIV_ROUND_CLOSEST(clockrate, baudrate);
}
@@ -498,9 +495,14 @@ static void f81232_set_baudrate(struct tty_struct *tty,
speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE };
for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
- idx = f81232_find_clk(baud_list[i]);
+ baudrate = baud_list[i];
+ if (baudrate == 0) {
+ tty_encode_baud_rate(tty, 0, 0);
+ return;
+ }
+
+ idx = f81232_find_clk(baudrate);
if (idx >= 0) {
- baudrate = baud_list[i];
tty_encode_baud_rate(tty, baudrate, baudrate);
break;
}
--
2.37.4