Re: [PATCH clocksource 1/3] clocksource: Reject bogus watchdog clocksource measurements
From: Feng Tang
Date: Wed Nov 30 2022 - 01:03:29 EST
On Tue, Nov 29, 2022 at 09:50:24PM -0800, Paul E. McKenney wrote:
[...]
> >
> > Great! As both HPET and PM_TIMER get the same calibration 1975.000 MHz,
> > and it matches the 40ms drift per second you mentioned earlier, this
> > seems like the CPUID(0x15) gave the wrong frequence number.
> >
> > Or unlikely, HPET and PM_TIMER are driven by the same circuit source,
> > which has deviation.
> >
> > Either way, I think the HW/FW could have some problem.
>
> And this time with your printk()s:
>
> [ 0.000000] tsc: using CPUID[0x15] crystal_khz= 24000 kHz ebx=158 eax=2
> [ 0.000000] tsc: Detected 1900.000 MHz processor
> [ 0.000000] tsc: Detected 1896.000 MHz TSC
> [ 5.268858] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 25.706231] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x36a8d32ce31, max_idle_ns: 881590731004 ns
> [ 32.223011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 57.823933] clocksource: Switched to clocksource tsc-early
> [ 58.144840] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 63.613713] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a8d32ce31, max_idle_ns: 881590731004 ns
> [ 63.637323] clocksource: Switched to clocksource tsc
> [ 64.673579] tsc: Warning: TSC freq calibrated by CPUID/MSR differs from what is calibrated by HW timer, please check with vendor!!
> [ 64.703719] tsc: Previous calibrated TSC freq: 1896.000 MHz
> [ 64.716816] tsc: TSC freq recalibrated by [PM_TIMER]: 1974.999 MHz
This confirms the tsc frequency is calculated from CPUID(0x15).
> What would be good next steps to check up on the hardware and firmware?
Maybe raise it to vendor? I have no idea how to check thos black boxes :)
> (My next step involves a pillow, but will follow up tomorrow morning
> Pacific Time.)
Really thanks for checking this through late night!
Thanks,
Feng
> Thanx, Paul