Re: [PATCH v2 7/9] riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree

[Samuel Holland]

On 11/27/22 07:24, Jisheng Zhang wrote:
> Sipeed manufactures a M1s system-on-module and dock board, add basic
> support for them.
> 
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
> ---
>  arch/riscv/boot/dts/Makefile                  |  1 +
>  arch/riscv/boot/dts/bouffalolab/Makefile      |  2 ++
>  .../dts/bouffalolab/bl808-sipeed-m1s-dock.dts | 25 +++++++++++++++++++
>  .../dts/bouffalolab/bl808-sipeed-m1s.dtsi     | 21 ++++++++++++++++
>  4 files changed, 49 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/bouffalolab/Makefile
>  create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts
>  create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi
> 
> diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
> index ff174996cdfd..b525467152b2 100644
> --- a/arch/riscv/boot/dts/Makefile
> +++ b/arch/riscv/boot/dts/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
> +subdir-y += bouffalolab
>  subdir-y += sifive
>  subdir-y += starfive
>  subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
> diff --git a/arch/riscv/boot/dts/bouffalolab/Makefile b/arch/riscv/boot/dts/bouffalolab/Makefile
> new file mode 100644
> index 000000000000..5419964e892d
> --- /dev/null
> +++ b/arch/riscv/boot/dts/bouffalolab/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_SOC_BOUFFALOLAB) += bl808-sipeed-m1s-dock.dtb
> diff --git a/arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts b/arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts
> new file mode 100644
> index 000000000000..c6b4894a7b88
> --- /dev/null
> +++ b/arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2022 Jisheng Zhang <jszhang@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "bl808-sipeed-m1s.dtsi"
> +
> +/ {
> +	model = "Sipeed M1s Dock";
> +	compatible = "sipeed,m1s-dock", "sipeed,m1s", "bouffalolab,bl808";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:2000000n8";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi b/arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi
> new file mode 100644
> index 000000000000..5026de768534
> --- /dev/null
> +++ b/arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi
> @@ -0,0 +1,21 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2022 Jisheng Zhang <jszhang@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "bl808.dtsi"
> +
> +/ {
> +	compatible = "sipeed,m1s", "bouffalolab,bl808";
> +
> +	memory@50000000 {
> +		device_type = "memory";
> +		reg = <0x50000000 0x04000000>;
> +	};

The PSRAM is part of the BL808, so this should go in the SoC .dtsi file.
(Unless I'm missing something and there are BL808 variants with
different amounts of memory. The PSRAM init code in the SDK does size
detection, so I suppose it is possible.)

Regards,
Samuel

> +};
> +
> +&xtal {
> +	clock-frequency = <40000000>;
> +};