[PATCH v2 04/12] arm64: dts: qcom: sm6115: Add TSENS node

[Adam Skladowski]

Add nodes required for TSENS block using the common qcom,tsens-v2 binding.

Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 2a55087b103e..a2ac06f4693b 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -523,6 +523,17 @@ spmi_bus: spmi@1c40000 {
 			#interrupt-cells = <4>;
 		};
 
+		tsens0: thermal-sensor@4410000 {
+			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+			reg = <0x04411000 0x1ff>, /* TM */
+			      <0x04410000 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x045f0000 0x7000>;
-- 
2.25.1