Re: [PATCH] Prevent buffer overflow in UVC Gadget setup handler

[Szymon Heidrich]

On 01/12/2022 14:49, Dan Scally wrote:
> Hello - thanks for the patch
> 
> On 01/12/2022 12:21, Szymon Heidrich wrote:
>> Setup function uvc_function_setup
> 
> 
> You've written uvc_function_setup here, but the code changes uvc_function_ep0_complete.

Yes, this was intentional as uvc_function_setup prevents handling of control
transfer requests with wLength grater than UVC_MAX_REQUEST_SIZE.
The uvc_function_ep0_complete function handles data phase thus was modified.

> 
>>   permits control transfer
>> requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE),
>> data stage handler for OUT transfer uses memcpy to copy req->actual
>> bytes to uvc_event->data.data array of size 60. This may result
>> in an overflow of 4 bytes.
>>
>> Signed-off-by: Szymon Heidrich <szymon.heidrich@xxxxxxxxx>
> 
> 
> Good catch
> 
>> ---
>>   drivers/usb/gadget/function/f_uvc.c | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
>> index 6e196e061..69c5eb3a3 100644
>> --- a/drivers/usb/gadget/function/f_uvc.c
>> +++ b/drivers/usb/gadget/function/f_uvc.c
>> @@ -216,8 +216,9 @@ uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req)
>>             memset(&v4l2_event, 0, sizeof(v4l2_event));
>>           v4l2_event.type = UVC_EVENT_DATA;
>> -        uvc_event->data.length = req->actual;
>> -        memcpy(&uvc_event->data.data, req->buf, req->actual);
>> +        uvc_event->data.length = (req->actual > sizeof(uvc_event->data.data) ?
>> +            sizeof(uvc_event->data.data) : req->actual);
> 
> 
> There's a clamp() macro in f_uvc.c, can we use that?
> 
>> +        memcpy(&uvc_event->data.data, req->buf, uvc_event->data.length);
>>           v4l2_event_queue(&uvc->vdev, &v4l2_event);
>>       }
>>   }

If it is more appropriate I will use min_t(unsigned int, req->actual, sizeof(uvc_event->data.data)).