Re: [PATCH v5 13/16] x86: decouple PAT and MTRR handling

[Kirill A. Shutemov]

On Thu, Dec 01, 2022 at 05:33:28PM +0100, Juergen Gross wrote:
> On 01.12.22 17:26, Kirill A. Shutemov wrote:
> > On Wed, Nov 02, 2022 at 08:47:10AM +0100, Juergen Gross wrote:
> > > Today PAT is usable only with MTRR being active, with some nasty tweaks
> > > to make PAT usable when running as Xen PV guest, which doesn't support
> > > MTRR.
> > > 
> > > The reason for this coupling is, that both, PAT MSR changes and MTRR
> > > changes, require a similar sequence and so full PAT support was added
> > > using the already available MTRR handling.
> > > 
> > > Xen PV PAT handling can work without MTRR, as it just needs to consume
> > > the PAT MSR setting done by the hypervisor without the ability and need
> > > to change it. This in turn has resulted in a convoluted initialization
> > > sequence and wrong decisions regarding cache mode availability due to
> > > misguiding PAT availability flags.
> > > 
> > > Fix all of that by allowing to use PAT without MTRR and by reworking
> > > the current PAT initialization sequence to match better with the newly
> > > introduced generic cache initialization.
> > > 
> > > This removes the need of the recently added pat_force_disabled flag, so
> > > remove the remnants of the patch adding it.
> > > 
> > > Signed-off-by: Juergen Gross <jgross@xxxxxxxx>
> > 
> > This patch breaks boot for TDX guest.
> > 
> > Kernel now tries to set CR0.CD which is forbidden in TDX guest[1] and
> > causes #VE:
> > 
> > 	tdx: Unexpected #VE: 28
> > 	VE fault: 0000 [#1] PREEMPT SMP NOPTI
> > 	CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rc1-00015-gadfe7512e1d0 #2646
> > 	Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
> > 	RIP: 0010:native_write_cr0 (arch/x86/kernel/cpu/common.c:427)
> > 	 Call Trace:
> > 	  <TASK>
> > 	 ? cache_disable (arch/x86/include/asm/cpufeature.h:173 arch/x86/kernel/cpu/cacheinfo.c:1085)
> > 	 ? cache_cpu_init (arch/x86/kernel/cpu/cacheinfo.c:1132 (discriminator 3))
> > 	 ? setup_arch (arch/x86/kernel/setup.c:1079)
> > 	 ? start_kernel (init/main.c:279 (discriminator 3) init/main.c:477 (discriminator 3) init/main.c:960 (discriminator 3))
> > 	 ? load_ucode_bsp (arch/x86/kernel/cpu/microcode/core.c:155)
> > 	 ? secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:358)
> > 	  </TASK>
> > 
> > Any suggestion how to fix it?
> > 
> > [1] Section 10.6.1. "CR0", https://cdrdv2.intel.com/v1/dl/getContent/733568
> 
> What was the solution before?
> 
> I guess MTRR was disabled, so there was no PAT, too?

Right:

Linus' tree:

[    0.002589] last_pfn = 0x480000 max_arch_pfn = 0x10000000000
[    0.003976] Disabled
[    0.004452] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[    0.005856] CPU MTRRs all blank - virtualized system.
[    0.006915] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC

tip/master:

[    0.003443] last_pfn = 0x20b8e max_arch_pfn = 0x10000000000
[    0.005220] Disabled
[    0.005818] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.007752] tdx: Unexpected #VE: 28

The dangling "Disabled" comes mtrr_bp_init().


> If this is the case, you can go the same route as Xen PV guests do.

Any reason X86_FEATURE_HYPERVISOR cannot be used instead of
X86_FEATURE_XENPV there?

Do we have any virtualized platform that supports it?

-- 
  Kiryl Shutsemau / Kirill A. Shutemov